| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
31mm OD 12.3mm tube ID | SPF1437K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush Kit31mm OD 12.3mm tube ID  2.5hrs Fitment Time Fitment Difficulty- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
PS & DS standard | SPF1313K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitPS & DS standard - Fitment Difficulty
- Axle alignment required after fitting
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Alignment Correction for Performance | SPF1315AK | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitAlignment Correction for Performance - Fitting Position: Front
- Fitment Difficulty
- Axle alignment required after fitting
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
Alignment Correction | SPF1315K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 2hrs Fitment Time
- Axle alignment required after fitting
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
Alignment Correction | SPF1314K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
- Axle alignment required after fitting
- Fitment Difficulty
- 2hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4037 | 2 |  |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint/Bush Link
Length 85mm center to center - Fitting Position: Front
 Fitment Difficulty- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Measure bar diameter 17, 18, 19, 20, 21, 22mm available | SPF1343-21K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,19,20,21,22mm available available Sizes 17, 18, 19, 20, 21 & 22mm Vehicle Application Information:  Fitment Difficulty- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Measure bar diameter 17, 18, 19, 20, 21, 22mm available | SPF1343-22K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 17,18,19,20,21,22mm available available Sizes 17, 18, 19, 20, 21 & 22mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Control Arm Inner Bush Kit
VR4 Only | SPF1438K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Inner Bush KitVR4 Only - Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
VR4 , HG to HH Re-useUse original shell | SPF2031K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitVR4 , HG to HH Re-useUse original shell - 3.5hrs Fitment Time
- Fitment Difficulty
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
Sedan | SPF0427K | 2 | |
Bush, panhard rodPanhard Rod Bush KitSedan - Fitting Position: Rear
- Fitment Difficulty
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Measure bar diameter 16, 18, 19, 20 & 22mm available | SPF1344-19K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 16,18,19,20 & 22mm available available Sizes 12, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Measure bar diameter 16, 18, 19, 20 & 22mm available | SPF1344-20K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 16,18,19,20 & 22mm available available Sizes 12, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Position: Rear
- Fitment Difficulty
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Measure bar diameter 16, 18, 19, 20 & 22mm available | SPF1344-22K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 16,18,19,20 & 22mm available available Sizes 12, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitment Difficulty
- 0.75hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
Sedan "Must remove OE shell" | SPF1345K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Front Bush KitSedan "Must remove OE shell" - Fitment Difficulty
- 2.5hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
VR4 Only | SPF1439K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Front Bush KitVR4 Only - 3hrs Fitment Time
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
