| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degree Camber | SPF4351-16K | 1 | | $63.51 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 16mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Assembly Kit
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC1018 | 1 |  | $506.68 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Vehicle Application Information: Standard Replacement
Includes left and right arms, ball joints and all bushings These arms utilise SuperPro bushings and are manufactured from high strength steel and come complete with a heavy duty ball joint.
By eliminating the O.E style rubber bushings, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip
SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF4208K | 1 |  | $83.96 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Standard replacement | SPF4205K | 1 | | $176.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Double Offset
Alignment Correction. Caster Adjustment | SPF4207K | 1 | | $176.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Double OffsetAlignment Correction. Caster Adjustment Vehicle Application Information: - up to 2 degrees caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit - Single Offset
Alignment Correction. Caster Adjustment | SPF4206K | 1 | | $162.47 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetAlignment Correction. Caster Adjustment Vehicle Application Information: - 1 degree caster adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
| SPF4204-21K | 1 | | $62.14 |
Mounting, stabiliserSway Bar To Chassis Bush Kitavailable Sizes 21, 22, 23, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
| SPF4204-22K | 1 | | $62.14 |
Mounting, stabiliserSway Bar To Chassis Bush Kitavailable Sizes 21, 22, 23, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
| SPF4204-23K | 1 | | $62.14 |
Mounting, stabiliserSway Bar To Chassis Bush Kitavailable Sizes 21, 22, 23, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
| SPF4204-25K | 1 | | $58.01 |
Mounting, stabiliserSway Bar To Chassis Bush Kitavailable Sizes 21, 22, 23, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Blade Control Arm Front Kit
| SPF4217K | 1 | | $394.36 |
Mounting Kit, control/trailing arm mountingBlade Control Arm Front Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF4210K | 1 | | $219.59 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner & Outer Bush Kit
| SPF4212K | 1 | | $147.59 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
Alignment Correction. Camber Adjustment | SPF4213K | 1 | | $98.27 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush KitAlignment Correction. Camber Adjustment Vehicle Application Information: - +/- 1 Degree Camber Adjustment available
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Bush Kit
| SPF5108K | 1 | | $115.28 |
Bush, differential mountDifferential Centre Rear Support Bush KitThe OEM differential mount bushing has been identified as having a low service life.
SuperPro has developed a part that is easy to install, with a high service life and delivers zero cabin noise. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Sway Bar To Chassis Bush Kit
OE Sway Bar Size | SPF4203-15K | 1 | | $63.06 |
Mounting, stabiliserSway Bar To Chassis Bush KitOE Sway Bar Size available Sizes 15, 18, 19, 21 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar To Chassis Bush Kit
| SPF4203-19K | 1 | | $63.06 |
Mounting, stabiliserSway Bar To Chassis Bush Kitavailable Sizes 15, 18, 19, 21 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF4215K | 1 | | $144.30 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
