Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  | $39.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit
| SPF1843K | 1 |  | $81.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush Kit- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit PS & DS standard | SPF1280K | 1 |  | $108.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitPS & DS standard Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit Alignment Correction for Performance | SPF1282AK | 1 |  | $201.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitAlignment Correction for Performance Vehicle Application Information: - Fitting Time [min.]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit - Double Offset Alignment Correction | SPF1282K | 1 |  | $193.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - PS increased DS decrease caster
- Performance Handling Kit
- Fitting Position: Front
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit - Single Offset Alignment Correction | SPF1281K | 1 |  | $159.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - PS increased DS standard caster
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link LHS - Standard Replacement | TRC4023L | 1 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkLHS - Standard Replacement 10mm Ball Joint Link
90 degree opposed
Length 105mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link RHS - Standard Replacement | TRC4023R | 1 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkRHS - Standard Replacement 10mm Ball Joint Link
90 degree opposed
Length 105mm center to center - Fitting Time [min.]: 30
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 |  | $166.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0202-20K | 1 |  | $30.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 22, 23, 25.4, 26 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0202-25.4K | 1 |  | $30.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 22, 23, 25.4, 26 & 27mm Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Camber Adjusting Bolt Kit Adds +/- 1.5 Degree Camber | SPF4351-12K | 1 |  | $39.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 12mm - Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 |  | $166.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|