| Front and Rear | Enhancement Bush Kit
| KIT195K | 1 |  | $1406.00 |
 Mounting, control/trailing armEnhancement Bush KitAs the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on such a large vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised.
With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. Lifting a vehicle increases the forces on the suspension bushings, requiring a more resilient bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms. You need SuperPro Bushings if: - The rubber bushings start to show signs of wear.
- Bigger Wheels & Tyres are fitted.
- The vehicles ride height is changed.
- The vehicle carries more loads.
This Kit contains: - Front Control Arm Lower-Front Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Front Control Arm Lower-Rear Bush Kit
- Front Shock Absorber Upper Bush Kit
- Front Steering Rack & Pinion Mount Bush
- Rear Trailing Arm Lower Bush Kit
- Rear Trailing Arm Upper Bush Kit
- Rear Panhard Rod Bush Kit
- Axle alignment required after fitting
- Fitting time [min]: 1200
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front | 39mm Extra Heavy Duty Non Adjustable Sway Bar
| RC0029F-39 | 1 |  | $528.00 |
Stabiliser Bar, suspension39mm Extra Heavy Duty Non Adjustable Sway BarSuperPro Roll Control Front Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars are designed correctly and the Sway Bar links are lengthened, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Sway Bars will- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Rear Sway Bar Kit to get the complete handling upgrade package Vehicle Application Information: - does not suit KDSS vehicles
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: RC0029R-33 (x1)
|
| Front | Coil Spring Spacer Bush Kit
| SPF3281-101K | 2 |  | $55.00 |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information: Individual Spacer to trim ride height - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
| SPF3281-10K | 1 | | $98.00 |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information: 10mm thick Spacer - Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
| SPF3281-201K | 2 | | $79.00 |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information: - raises Vehicle approx. 20mm
Individual Spacer to trim ride height - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
| SPF3281-20K | 1 | | $143.00 |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush KitVehicle Application Information: - raises Vehicle approx. 20mm
20mm Spacer - Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Camber Bolt Kit
| TRC0026 | 1 | | $500.00 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Front Bush Kit
| SPF3279K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit
| SPF3278K | 1 | | $314.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm
| KIT6485K | 2 | | $66.00 |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Fixed Offset Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm.
The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.
Note: Two kits will be required if the bushings in both arms need replacing.
This kit is used to replace the bushings in the following part numbers: TRC6485 & TRC8485
Vehicle Application Information: - replacement bush kit to suit TRC6485 & TRC8485
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Upper Complete Assembly - Adjustable
| TRC485 | 1 | | $1068.00 |
 Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - AdjustableVehicle Application Information: - Adjustable up to 4 Degrees increase in Caster and + or - 2 Degrees Camber Adjustment
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem.
Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features- Increased articulation, perfect for the off road environment
- Provides for camber and caster adjustment using an adjustable ball joint
- Increased clearance between spring and Control Arm at full articulation
- SuperPro Bushings
- Made in Australia
Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
| Front | Control Arm Upper Complete Assembly - Fixed Offset
| TRC6485 | 1 | | $730.00 |
 Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetVehicle Application Information: - providing an increase of 2 degrees of caster and 2 degrees of negative camber over the OE UCA
Left and Right Fixed Offset Arms for Lifted Vehicles with Caster and Camber Correction fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement Fixed offset upper control arms with heavy-duty, high-articulation ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles.The SuperPro fixed offset upper control arm (UCA) is a high-performance aftermarket component designed to enhance the wheel alignment of lifted 4x4 vehicles, resulting in reduced tire wear and improved overall performance. This UCA is constructed using high-strength steel forgings and tube steel, making it durable and reliable for heavy-duty use. The components are robot-welded, ensuring consistent and precise manufacturing standards.
The SuperPro fixed offset UCA features a heavy-duty high-articulation ball joint that enables the suspension to have greater articulation without binding, allowing for improved control and handling over rough terrain.
This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments.
Vehicle Application Information: - Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: KIT6485K (x1)
|
| Front | Control Arm Upper Inner Bush Kit
| SPF3277K | 1 | | $263.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Upper Inner Bush Kit - Offset
| SPF3277XK | 1 | | $288.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - OffsetAn "Offset Kit" in this position is used to correct the camber change that occurs on a lifted or lowered vehicle.
By following the install instructions, this bushing kit can be fitted in multiple ways to change the position of the arm to get the optimal result for camber correction.
Vehicle Application Information: - Fitting time [min]: 240
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Differential Drop Kit
| TRCLC200DD | 1 | | $172.00 |
Mounting, differentialDifferential Drop KitSuits Lifted vehicles.
It is supplied complete with all required spacers, bolts, washers and nuts. When lifting the 2007 to current 200 Series Land Cruiser, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots that will lead to splitting and premature failure of the CV.
The SuperPro bolt on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles the CV joints are operating at will help avoid the expensive replacement costs of CV's and boots.
This wear is accelerated further if larger & wider wheels and tyres are fitted. - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
| RS003 | 2 | | $106.00 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
| SPF3743K | 1 | | $98.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush
| SPF3770K | 1 | | $128.00 |
Bush, steering rackSteering Rack & Pinion Mount BushVehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 510
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Strut Mount Lower Bush Kit
| SPF3282K | 1 | | $283.00 |
Bush, strut mountStrut Mount Lower Bush KitVehicle Application Information: - to suit O.E Strut eye size only
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link Lower Bush Kit
| SPF2147K | 1 | | $51.00 |
Mounting, stabiliser barSway Bar Link Lower Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF3280-43K | 1 | | $78.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit Vehicles with KDSS
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF3448-35K | 1 | | $80.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes: 32, 34, 35, 37.5, 39 & 40 mm Vehicle Application Information: - 35mm ID
- to suit vehicles from 01/2012 - 03/2013
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | 33mm Extra Heavy Duty Non Adjustable Sway Bar
| RC0029R-33 | 1 | | $486.00 |
Stabiliser Bar, suspension33mm Extra Heavy Duty Non Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package Vehicle Application Information: - does not suit KDSS vehicles
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: RC0029F-39 (x1)
|
| Rear | Coil Spring Spacer Bush Kit
| SPF3287-10K | 1 | | $102.00 |
Spring SeatCoil Spring Spacer Bush KitVehicle Application Information: - raises vehicle approximately 10mm
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Coil Spring Spacer Bush Kit
| SPF3287-15K | 1 | | $143.00 |
Spring SeatCoil Spring Spacer Bush KitVehicle Application Information: - raises vehicle approximately 15mm
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Extended Sway Bar Link
| TRC4308 | 1 | | $282.00 |
Link/Coupling Rod, stabiliser barExtended Sway Bar LinkTRC4308 has been designed and manufactured in a one piece forged design with OE specification bushes and ball stud to replicate the factory component in function and appearance.
Suited to KDSS fitted 200 Series Land Cruisers with 50+mm of suspension lift.
The link allows considerably more suspension travel with supporting modifications such as longer shocks and control arms etc and assists with rectification of the “KDSS Lean” as commonly found in the 200 series.
TRC4308 includes a 50mm extension at the sway bar mount pivot, compared to the OE arm, allowing increased suspension travel for 200 Series with KDSS when modified to run long travel shocks (length to be checked & confirmed prior to fitment).
Vehicle Application Information: - to suit lifted vehicles with KDSS only
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 30
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
| SPF3292K | 1 | | $64.00 |
Bush, panhard rodPanhard Rod Bush Kit- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Lower Bush Kit
| SPF2147K | 1 | | $51.00 |
Mounting, stabiliser barSway Bar Link Lower Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Link Upper Bush Kit
| SPF4805-80K | 1 | | $49.00 |
Mounting, stabiliser barSway Bar Link Upper Bush KitVehicle Application Information: - to suit vehicles from 01/2012 - 03/2013
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Rear | Sway Bar Link Upper Bush Kit
| SPF4805-90K | 1 | | $50.00 |
Mounting, stabiliser barSway Bar Link Upper Bush KitVehicle Application Information: - to suit vehicles from 01/2012 - 03/2013
- Heavy Duty
- Fitting time [min]: 90
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF3449-30K | 1 | | $62.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes: 26, 30, 33 & 34 mm Vehicle Application Information: - 30mm ID
- to suit vehicles from 01/2012 - 03/2013
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Trailing Arm Lower Bush Kit
| SPF3286K | 1 | | $305.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
| SPF3285K | 1 | | $235.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
