Front | Control Arm Lower-Inner Bush Kit Standard replacement kit | SPF3162K | 1 |  | $96.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitStandard replacement kit - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Bush Kit - Double Offset Alignment Correction. Camber Adjustable | SPF3163K | 1 |  | $131.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kit - Double OffsetAlignment Correction. Camber Adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit Replaces OEM 48632-30090 | SPF3161K | 1 |  | $142.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitReplaces OEM 48632-30090 - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit Standard bush kit, Replaces OEM 4865-30020 | SPF3087K | 1 |  | $201.00 |
Control Arm-/Trailing Arm BushStrut Bar To Chassis Mount Bush KitStandard bush kit, Replaces OEM 4865-30020 Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset Alignment Correction, Caster Offset, approx. 2 degree change | SPF3089K | 1 |  | $176.00 |
Control Arm-/Trailing Arm BushStrut Bar To Chassis Mount Bush Kit - Double OffsetAlignment Correction, Caster Offset, approx. 2 degree change A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Performance Handling Kit
- 60mm OD
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Single Offset Alignment Correction. Replaces OEM Part Number: 4865-30020 | SPF3088K | 1 |  | $176.00 |
Control Arm-/Trailing Arm BushStrut Bar To Chassis Mount Bush Kit - Single OffsetAlignment Correction. Replaces OEM Part Number: 4865-30020 Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 210
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter, Replaces OEM 48815-90370 @ 30mm | SPF3164-30K | 1 |  | $55.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter, Replaces OEM 48815-90370 @ 30mm - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter, Replaces OEM 48815-90370 @ 30mm | SPF3164-31K | 1 |  | $55.00 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter, Replaces OEM 48815-90370 @ 30mm - Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF3032K | 1 |  | $135.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Shock Mount Bush Kit
| SPF3033K | 1 |  | $106.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Shock Mount Bush Kit- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit Remove outer shells for fitment | SPF1922K | 1 |  | $162.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitRemove outer shells for fitment - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Rear | Crossmember Supplement Washers Bush Kit Rear mount, to be fitted into original bushing | SPF2520K | 1 |  | $111.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitRear mount, to be fitted into original bushing - Fitting Position: Rear
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Crossmember Supplement Washers Bush Kit Front Mount | SPF2553K | 1 |  | $42.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitFront Mount - Axle alignment required after fitting
- Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit Upper is replacement bushing, lower is insert to original rubber bushing | SPF2769K | 1 |  | $92.00 |
Bush, differential mountDifferential Pinion Mount Bush KitUpper is replacement bushing, lower is insert to original rubber bushing - Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Subframe Rear Bush Kit Replaces original bushing | SPF3269K | 1 |  | $346.00 |
Bush, sub-frameSubframe Rear Bush KitReplaces original bushing - Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4006 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
60mm center to center - Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 |  | $133.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replaces OEM 48818-30080@ 24mm, measure bar diameter | SPF3165-24K | 1 |  | $60.00 |
Sway Bar Bush KitSway Bar Mount Bush KitReplaces OEM 48818-30080@ 24mm, measure bar diameter - Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replaces OEM 48818-30080@ 24mm, measure bar diameter | SPF3165-25K | 1 |  | $60.00 |
Sway Bar Bush KitSway Bar Mount Bush KitReplaces OEM 48818-30080@ 24mm, measure bar diameter - Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit Outer end of arm is ball joint style bushing | SPF3017K | 1 |  | $59.00 |
Bush, control arm mountingToe Control Arm Inner Bush KitOuter end of arm is ball joint style bushing - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF3016K | 1 |  | $86.00 |
Control Arm-/Trailing Arm BushTrailing Arm Front Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Rear | Trailing Arm Rear Bush Kit Bushing located in hub | SPF3031K | 1 |  | $111.00 |
Control Arm-/Trailing Arm BushTrailing Arm Rear Bush KitBushing located in hub - Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|