Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degree Camber | SPF4351-17K | 1 |  | $63.51 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 17mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit Re-use original mounting pin | SPF2663K | 1 |  | $40.38 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush KitRe-use original mounting pin Vehicle Application Information: - Re-use original mounting pin
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction | SPF1267K | 1 |  | $111.68 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - PS increased DS decrease alignment settings
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction | SPF1266K | 1 |  | $111.68 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer’s specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit Standard replacement | SPF1265K | 1 |  | $89.90 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Large end has 50mm inside diameter | SPF1348K | 1 |  | $74.89 |
Engine MountingEngine Steady Mount Bush KitLarge end has 50mm inside diameter Vehicle Application Information: - Large end has 50mm inside diameter
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Large end has 65mm inside diameter | SPF2706K | 1 |  | $103.08 |
Engine MountingEngine Steady Mount Bush KitLarge end has 65mm inside diameter Vehicle Application Information: - Large end has 65mm inside diameter
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering) Power steering | SPF1191K | 1 |  | $55.90 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Power steering Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering) Koyo Brand rack only | SPF3197K | 1 |  | $54.51 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)Koyo Brand rack only - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-16K | 1 |  | $38.85 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-17K | 1 |  | $37.28 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-18K | 1 |  | $35.98 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-20K | 1 |  | $35.98 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-23K | 1 |  | $37.28 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter 17, 18, 20, 23mm available | SPF1132-24K | 1 |  | $35.98 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 17,18,20,23mm available available Sizes 15, 16, 17, 18, 20, 23 & 24mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Camber Adjusting Bolt Kit Adds +/- 1.5 Degree Camber | SPF4351-15K | 1 |  | $54.84 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 15mm - Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Outer Bush Kit Fits outer of both front & rear arms | SPF1105K | 1 |  | $111.73 |
Mounting Kit, control/trailing arm mountingControl Arm Outer Bush KitFits outer of both front & rear arms Vehicle Application Information: - Fits outer of both front & rear arms
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replaces OEM 48818-06051, 15 & 16mm available | SPF2297-15K | 1 |  | $44.84 |
Mounting, stabiliserSway Bar Mount Bush KitReplaces OEM 48818-06051, 15 & 16mm available - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replaces OEM 48818-06051, 15 & 16mm available | SPF2297-16K | 1 |  | $44.84 |
Mounting, stabiliserSway Bar Mount Bush KitReplaces OEM 48818-06051, 15 & 16mm available - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replaces OEM 48818-06051, 15 & 16mm available | SPF2297-18K | 1 |  | $44.84 |
Mounting, stabiliserSway Bar Mount Bush KitReplaces OEM 48818-06051, 15 & 16mm available - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF0823K | 1 |  | $131.91 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|