| Front and Rear | Enhancement Bush Kit
suits Series I | KIT138K | 1 |  | $514.00 |
Suspension KitEnhancement Bush Kitsuits Series I Kit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Rear IRS Adjusting Camber & Toe Kit
- Fitting Time [min.]: 540
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front and Rear | Enhancement Bush Kit
suits Series II -on | KIT140K | 1 | | $453.00 |
Suspension KitEnhancement Bush Kitsuits Series II -on Kit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Rear IRS Adjusting Camber Only Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 420
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front | 30mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| SHF61CA | 1 |  | $451.00 |
 Sway Bar Stabiliser Kit30mm Heavy Duty 3 Position Blade Adjustable Sway BarVehicle Application Information: Selby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings The Ultimate Handling Package! Fitting larger sway bars has two main effects on - Vehicle balance in terms of understeer and oversteer
- Increased roll resistance
Both these effects provide increased tyre contact and grip for a vehicle.
dd in the SuperPro Adjustable sway bar links to: - Eliminate sway bar link flex
- Adjust in neutral sway bar positioning
- Maximize all positions on the adjustable Sway Bars
All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle!
From our testing, this is what we recommend as a good starting point: - Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
- Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.
- Fitting Time [min.]: 120
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Alignment Bush Kit - Front End
| KIT153K | 1 | | $258.00 |
Suspension KitAlignment Bush Kit - Front EndKit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Fitting Position: Front
- Fitting Time [min.]: 330
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degree Camber | SPF4351-14K | 1 |  | $42.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 14mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
| SPF2365-10K | 2 | | $31.00 |
Spring CapCoil Spring Spacer Bush KitA=164mm B=127.5mm C=10mm Vehicle Application Information: - Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
| SPF2365-5K | 2 | | $21.00 |
Spring CapCoil Spring Spacer Bush KitA=164mm B=127.5mm C=5mm Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Assembly Kit
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC1104 | 1 | | $278.10 |
Control ArmControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Vehicle Application Information: These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. - Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Bush Kit
| SPF1232K | 1 | | $66.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: KIT153K (x1)
|
| Front | Spring Insulator Bush Kit
Upper replacement of OEM 92002882 | SPF2498K | 1 | | $60.00 |
Spring CapSpring Insulator Bush KitUpper replacement of OEM 92002882 A=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat Vehicle Application Information: - Upper replacement of OE # 92002882
- Fitting Time [min.]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF1632K | 1 | | $23.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339-90K | 1 | | $287.00 |
Kit, caster adjustmentStrut Bar To Chassis Mount Bush KitAdjustable Caster Kit - Heavy Duty Option
Alignment Correction - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339K | 1 | | $215.00 |
Kit, caster adjustmentStrut Bar To Chassis Mount Bush KitAdjustable Caster Kit
Alignment Correction Super Pro Adjustable Strut Bar To Chassis Mount Bush Kit is considered one of those “must have” bushing replacements for the GMH vehicles. From the factory, the Strut bar is secured to the front subframe with a soft, fluid-filled bushing that breaks down prematurely. Its job is to absorb most of the braking load while locating the wheel and control arm for caster. However, when this bushing breaks down, it results in excessive wheel movement under braking resulting in degraded braking performance, pedal feel and increased tyre wear.The SuperPro Adjustable Strut Bar To Chassis Mount Bush Kit correct and prevent this issue and can provides increased caster adjustment for improved handling.
It is the perfect repair, repair upgrade or performance solution. - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Part of kit: KIT153K (x1)
|
| Front | Strut Bar To Lower Control Arm Bush Kit
| SPF0756CK | 1 | | $52.00 |
Bush, strut mountStrut Bar To Lower Control Arm Bush KitComfort option to be used with SPF2339K
Suited to cast steel arms - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Part of kit: KIT153K (x1)
|
| Front | Strut Bolt Replacement Kit
| SPF4960K | 2 | | $65.00 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting Difficulty: easy
- Fitting Time [min.]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Strut Top & Bearing
| SPF1590AK | 1 | | $221.00 |
Bush, strut mountStrut Top & BearingStandard Repair Upgrade Kit.
Kit contains SuperPro Hybrid Mounts, Bearings & Washers. - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Top & Bearing
| SPF1590BK | 1 | | $284.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting Time [min.]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Sway Bar Link
VY models only, does not suit VZ models | TRC4003 | 2 | | $39.30 |
Sway Bar Stabiliser KitSway Bar LinkVY models only, does not suit VZ models 10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
Strut end only, Vehicle has ball joint type end at sway bar, must re-use all original washers | SPF2755SK | 1 | | $12.00 |
Bush, shock absorberSway Bar Link Bush KitStrut end only, Vehicle has ball joint type end at sway bar, must re-use all original washers - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Kit
VY models Only. Does not Fit VZ Models | SPF3570K | 1 | | $131.00 |
Sway Bar Stabiliser KitSway Bar Link KitVY models Only. Does not Fit VZ Models 10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitting Time [min.]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10105 | 1 | | $184.40 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 160 mm - Maximum Length 205 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Link Rod Replacement Bush Kit
VY models Only. Does not Fit VZ Models | SPF0967RK | 1 | | $39.00 |
Sway Bar Bush KitSway Bar Link Rod Replacement Bush KitVY models Only. Does not Fit VZ Models - Fitting Time [min.]: 90
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1453-28K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1453-30K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1453-32K | 1 | | $32.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | 18mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| SHR50A | 1 | | $251.30 |
 Sway Bar Stabiliser Kit18mm Heavy Duty 2 Position Blade Adjustable Sway BarSelby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings The Ultimate Handling Package! Fitting larger sway bars has two main effects on- Vehicle balance in terms of understeer and oversteer
- Increased roll resistance
Both these effects provide increased tyre contact and grip for a vehicle.
dd in the SuperPro Adjustable sway bar links to:- Eliminate sway bar link flex
- Adjust in neutral sway bar positioning
- Maximize all positions on the adjustable Sway Bars
All this will give the vehicle balanced and upgraded tyre contact and dynamic grip which delivers the ultimate handling package for your Vehicle!
From our testing, this is what we recommend as a good starting point:- Scenario one is to set both bars to the hardest setting and is ideal for a vehicle with standard suspension, wheels and tyres.
- Scenario two is to set the front to the soft setting and the rear to the hardest setting and is ideal for a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Scenario three is to set both bars to the soft setting and is ideal for a vehicle fitted with a coil over kit or sports suspension pack.
Vehicle Application Information: - Fitting Time [min.]: 120
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Rear | Bump Stop Bush Kit - Upper
| SPF3906K | 1 | | $87.00 |
Bump StopBump Stop Bush Kit - Upper- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Control Arm Bush Kit
only one kit required if SPF2545K is fitted | SPF0611K | 2 | | $75.00 |
Control Arm-/Trailing Arm BushControl Arm Bush Kitonly one kit required if SPF2545K is fitted Vehicle Application Information: - IRS ( Independent Rear Suspension )
- IRS vehicles require 2 kits if not using adjuster kits (SPF2545K).
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Crossmember Supplement Washers Bush Kit
| SPF0840K | 1 | | $185.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitTo suit OE Bush
HSV series use lower bushing only as factory is solid top
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Differential Mount Insert
| SPF4171K | 1 | | $51.00 |
Bush, differential mountDifferential Mount InsertFits into voiding of original bushings - reduces unwanted differential movement Designed to fit into the voiding of the original rubber differential mount to eliminate excessive driveline movement to deliver an improved gear shift feel and superior power transmission through to the wheels.
This mount insert will also lengthen the life of the original mount.
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | IRS Adjusting Camber & Toe Kit
suits Series I | SPF0877K | 1 | | $238.00 |
Suspension KitIRS Adjusting Camber & Toe Kitsuits Series I Suited to vehicles without Factory Toe Adjusting Arm - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Part of kit: KIT138K (x1)
|
| Rear | IRS Adjusting Camber Only Kit
suits Series II - on | SPF2545K | 1 | | $170.00 |
Suspension KitIRS Adjusting Camber Only Kitsuits Series II - on Suited to vehicles fitted with Factory Toe Adjusting Arm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Position: Rear
- Part of kit: KIT140K (x1)
|
| Rear | IRS Adjusting Kit Toe Only Bush Kit
suits Series I | SPF0877TK | 1 | | $166.00 |
Suspension KitIRS Adjusting Kit Toe Only Bush Kitsuits Series I Suited to vehicles without Factory Toe Adjusting Arm - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Shock Absorber Upper Bush Kit
| SPF0201K | 1 | | $28.00 |
Bracket, stabilizer mountingShock Absorber Upper Bush KitVehicle Application Information: - Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 15mm | SPF1358-10K | 2 | | $40.00 |
Spring CapSpring Insulator Lower Bush KitIRS Raises vehicle approximately 15mm A=138mm B=33.8mm C=10mm - Fitting Position: Rear
- Fitting Time [min.]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 9mm | SPF1358-6K | 2 | | $28.00 |
Spring CapSpring Insulator Lower Bush KitIRS Raises vehicle approximately 9mm A=138mm B=33.8mm C=6mm - Fitting Time [min.]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Spring Insulator Lower Bush Kit
IRS Raises vehicle approximately 12mm | SPF1358-8K | 2 | | $34.00 |
Spring CapSpring Insulator Lower Bush KitIRS Raises vehicle approximately 12mm A=138mm B=33.8mm C=8mm - Fitting Time [min.]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Subframe Front Bush Kit
Standard Replacement Kit | SPF3267K | 1 | | $246.00 |
Bush, sub-frameSubframe Front Bush KitStandard Replacement Kit Standard Replacement Kit
IRS only - Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Subframe Front Bush Kit
Competition/Race Kit | SPF3367K | 1 | | $277.00 |
Bush, sub-frameSubframe Front Bush KitCompetition/Race Kit Competition/Race Kit
IRS only - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF0513K | 1 | | $85.00 |
Sway Bar Bush KitSway Bar Link Bush Kit- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit
| TRC4088 | 1 | | $43.20 |
Sway Bar Stabiliser KitSway Bar Link Kit8mm ID Bush/Bush Link
Length 180mm center to center - Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-18K | 1 | | $28.00 |
Sway Bar Bush KitSway Bar Mount To Crossmember Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-19K | 1 | | $28.00 |
Sway Bar Bush KitSway Bar Mount To Crossmember Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-20K | 1 | | $28.00 |
Sway Bar Bush KitSway Bar Mount To Crossmember Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
