Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-16K | 1 |  | $63.51 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 16mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Inner-Front & Rear Bush Kit Standard replacement | SPF2306K | 1 |  | $300.20 |
Mounting Kit, control/trailing arm mountingControl Arm Inner-Front & Rear Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | Control Arm Inner-Front & Rear Bush Kit - Offset Alignment Correction. Caster adjustable | SPF2308K | 1 |  | $321.31 |
Mounting Kit, control/trailing arm mountingControl Arm Inner-Front & Rear Bush Kit - OffsetAlignment Correction. Caster adjustable Vehicle Application Information: - Caster increase kit 2 x page fitting instruction included in kit.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit
| TRC1094 | 1 |  | $347.60 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitThe SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit Standard replacement | SPF2306FK | 1 |  | $212.72 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit
| SPF2307K | 1 |  | $117.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2183-18K | 1 |  | $47.69 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable sizes 18, 20, 22, 23, 24, 27.5 & 28mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2183-20K | 1 |  | $47.69 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable sizes 18, 20, 22, 23, 24, 27.5 & 28mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Rear Bush Kit
| SPF2318K | 1 |  | $95.41 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit Kit includes 2 x 14mm bolts & 2 x 12mm bolts | SPF3195K | 1 |  | $153.52 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitKit includes 2 x 14mm bolts & 2 x 12mm bolts - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit Standard replacement | SPF2310K | 1 |  | $106.57 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit Alignment Correction. Camber adjustable | SPF2311K | 1 |  | $149.02 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitAlignment Correction. Camber adjustable Vehicle Application Information: - Adjustable camber {Increase or Decrease}
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Outer Bush Kit Standard replacement | SPF2310K | 1 |  | $106.57 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush KitStandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Outer Bush Kit Alignment Correction. Camber adjustable | SPF2311K | 1 |  | $149.02 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush KitAlignment Correction. Camber adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
Vehicle Application Information: - Adjustable camber {Increase or Decrease}
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025A | 1 |  | $153.19 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable 10mm Ball Joint Adjustable Link
Minimum Length 85 mm - Maximum Length 100 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-18K | 1 |  | $66.76 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-19K | 1 |  | $67.69 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2403-20K | 1 |  | $67.69 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable sizes 14, 15, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|