Front | Control Arm Lower Assembly Kit
| TRC1165 | 1 | | $593.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade TheSuperPro front lower control arm kit has been designed to be an easy repairsolution. Offeringboth alignment and vehicle handling improvements. Designed not just as a repairsolution but as an upgrade! Suppliedas a complete kit and fully assembled with proprietary SuperProbushings. We have made this kit by far the best choice on themarket. These arms utilisethe SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised forlongevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are anupgrade from the factory arms, eliminating the undesirable arm movement tomaintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro stronglyadvises that both arms should always be replaced at the same time to maintainthe correct geometry. Vehicle Application Information: - standard replacement
- kit does not include ball joints, please re-use OE ball joints
- Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit
| SPF4860K | 1 | | $231.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit - Double Offset
| SPF4862K | 1 | | $231.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit - Single Offset
| SPF4861K | 1 | | $231.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4061L | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
30 Degree opposed
Length 288mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4061R | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
30 Degree opposed
Length 288mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4082L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
90 Degree opposed
Length 117mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4082R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
90 Degree opposed
Length 117mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|