Front | Alignment Bush Kit - Front End
| KIT153K | 1 | | $349.00 |
Mounting, control/trailing armAlignment Bush Kit - Front EndKit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Fitting time [min]: 330
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Camber Adjusting Bolt Kit
| SPF4351-14K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 14mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-10K | 2 | | $42.00 |
Spring SeatCoil Spring Spacer Bush KitA=164mm B=127.5mm C=10mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-5K | 2 | | $29.00 |
Spring SeatCoil Spring Spacer Bush KitA=164mm B=127.5mm C=5mm Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit
| TRC1104 | 1 | | $319.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting Difficulty: moderate
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Lower Inner Bush Kit
| SPF1232K | 1 | | $89.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: KIT153K (x1)
|
Front | Spring Insulator Bush Kit - Upper
| SPF2498K | 1 | | $81.00 |
Spring SeatSpring Insulator Bush Kit - UpperA=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF1632K | 1 | | $32.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339EK | 1 | | $229.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitNon Adjustable Kit - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339K | 1 | | $290.00 |
Kit, caster adjustmentStrut Bar To Chassis Mount Bush KitAdjustable Caster Kit
Alignment Correction Super Pro Adjustable Strut Bar To Chassis Mount Bush Kit is considered one of those “must have” bushing replacements for the GMH vehicles. From the factory, the Strut bar is secured to the front subframe with a soft, fluid-filled bushing that breaks down prematurely. Its job is to absorb most of the braking load while locating the wheel and control arm for caster. However, when this bushing breaks down, it results in excessive wheel movement under braking resulting in degraded braking performance, pedal feel and increased tyre wear.The SuperPro Adjustable Strut Bar To Chassis Mount Bush Kit correct and prevent this issue and can provides increased caster adjustment for improved handling. It is the perfect repair, repair upgrade or performance solution. - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: KIT153K (x1)
|
Front | Strut Bar To Lower Control Arm Bush Kit
| SPF0756CK | 1 | | $71.00 |
Bush, strut mountStrut Bar To Lower Control Arm Bush KitComfort option to be used with SPF2339K
Suited to cast steel arms - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Strut Bolt Replacement Kit
| SPF4960K | 2 | | $89.00 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 | | $295.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4003 | 2 | | $47.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: - VY models only, does not suit VZ models
10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2755SK | 1 | | $16.00 |
Bush, shock absorberSway Bar Link Bush KitVehicle Application Information: - strut end only, vehicle has ball joint type end at sway bar, re-use all original washers
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Kit
| SPF3570K | 1 | | $177.00 |
Stabiliser Bar, suspensionSway Bar Link Kit10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Rod Replacement Bush Kit
| SPF0967RK | 1 | | $54.00 |
Mounting, stabiliser barSway Bar Link Rod Replacement Bush Kit- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-30K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Bump Stop Bush Kit
| SPF2392K | 1 | | $252.00 |
Bump StopBump Stop Bush KitBump Stop 93mm long, 55/27mm wide, 63mm high.
Base Plate 150 x 65mm, bolt hole centre to centre 125mm Vehicle Application Information: - to suit lowered suspension only
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF2382K | 1 | | $156.00 |
Bushing, leaf springSpring Front Eye Bush Kit- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| KIT109K | 1 | | $200.00 |
Bushing, leaf springSpring Rear Bush Kit AllComplete rear leaf spring bushing kit These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 | | $66.00 |
Bushing, leaf springSpring Rear Bush Kit All- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2384-14K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|