| Front | Bump Stop Kit
| SPF1833BK | 1 |  | $97.09 |
Bump StopBump Stop Kit2 x Bump Stops & 2 x Boots per kit, 54mm Long x 67.5 Wide x 20-22mm Inside Diameter  Fitment Difficulty- Fitting Position: Front
 2hrs Fitment Time- Part of kit: (x)
|
| Front | Control Arm Lower Assembly Kit
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC1104 | 1 |  | $270.00 |
Control ArmControl Arm Lower Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Vehicle Application Information: These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. - Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF3576K | 1 | | $314.22 |
Bush, control arm mountingControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
| SPF3980K | 1 | | $95.20 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush Kit- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Spring Insulator Bush Kit
Upper replacement of OEM 92002882 | SPF2498K | 1 | | $55.68 |
Spring CapSpring Insulator Bush KitUpper replacement of OEM 92002882 A=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat Vehicle Application Information: - Upper replacement of OE # 92002882
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Strut Bolt Replacement Kit
| SPF4960K | 2 | | $61.00 |
Bolt, axle strutStrut Bolt Replacement Kit Fitment Difficulty- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Strut Top & Bearing
| SPF1590AK | 1 | | $206.31 |
Bush, strut mountStrut Top & BearingStandard Repair Upgrade Kit.
Kit contains SuperPro Hybrid Mounts, Bearings & Washers. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Strut Top & Bearing
| SPF1590BK | 1 | | $265.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
VY models only, does not suit VZ models | TRC4003 | 2 | | $42.00 |
Sway Bar Stabiliser KitSway Bar LinkVY models only, does not suit VZ models 10mm Ball Joint/Bush Link
Length 210 mm center to center - Fitment Difficulty
- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link Vehicle Application Information: 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitment Difficulty
- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Standard Replacement, to suit VZ | TRC4008L | 1 | | $34.50 |
Sway Bar Stabiliser KitSway Bar LinkLHS - Standard Replacement, to suit VZ 10mm Ball Joint Link
67.5 Degree opposed
Length 210mm center to center - Fitment Difficulty
- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Standard Replacement, to suit VZ | TRC4008R | 1 | | $34.50 |
Sway Bar Stabiliser KitSway Bar LinkRHS - Standard Replacement, to suit VZ 10mm Ball Joint Link
67.5 Degree opposed
Length 210mm center to center - Fitment Difficulty
- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1453-28K | 1 | | $29.84 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1453-30K | 1 | | $29.84 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Bump Stop Bush Kit
Lowered suspension only | SPF2392K | 1 | | $174.00 |
Bump StopBump Stop Bush KitLowered suspension only Bump Stop 93mm long, 55/27mm wide, 63mm high. Base Plate 150 x 65mm, bolt hole centre to centre 125mm - Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Front Eye Bush Kit
| SPF2382K | 1 | | $107.90 |
Bushing, leaf springSpring Front Eye Bush Kit- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Bush Kit All
Complete rear leaf spring bushing kit | KIT109K | 1 |  | $137.82 |
Bushing, leaf springSpring Rear Bush Kit AllComplete rear leaf spring bushing kit These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitment Difficulty
- Fitting Position: Rear
- 3.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 | | $45.24 |
Bushing, leaf springSpring Rear Bush Kit All- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Measure bar diameter, 14mm available | SPF2384-14K | 1 | | $26.93 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter, 14mm available - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
