| Front | 30mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0087FZ-30 | 1 |  | $ |
Sway Bar Stabiliser Kit30mm Heavy Duty 2 Position Blade Adjustable Sway BarVehicle Application Information: - suits standard & FE3 Suspension
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Bump Stop Bush Kit
| SPF2883K | 1 |  | $127.00 |
Bump StopBump Stop Bush KitDesigned to suit lowered vehicles - Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Caster Arm Complete Assembly
| TRC1011 | 1 | | $525.30 |
Control ArmCaster Arm Complete AssemblyReplacement Arms for Performance and Repair Upgrade with SuperPro Bushings - Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Complete Assembly
| TRC1010 | 1 | | $267.80 |
Control ArmControl Arm Lower Complete AssemblyReplacement Arms for Performance and Repair Upgrade with SuperPro Bushings - Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Bush Kit
| SPF2862K | 1 | | $182.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitRemove original shell Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Engine Mount Kit
Complete set of Engine Mounts to suit V8 Engine | TRC2000 | 1 | | $252.40 |
Engine MountingEngine Mount KitComplete set of Engine Mounts to suit V8 Engine The Engine Mount has been optimised for longevity, durability and performance by utilising SuperPro Hybrid material to reduce the overall movement of the engine, without compromising NVH.
This Engine Mount Kit has some very clever engineering “built in” to produce the best engine mount available for these vehicles.
The SuperPro Engine Mounts perform superbly in a standard application, but they really shine in a high performance application.
With the movement controlled by the internals of the mount and the superior durability of the material even the highest performance vehicles will benefit from a mount that still maintains the “original” feel!
This mount does it all and is backed by the SuperPro Lifetime Warranty!
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Enhancement Bush Kit- Front Alignment
| KIT154K | 1 |  | $354.00 |
Suspension KitEnhancement Bush Kit- Front AlignmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Kit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 330
- Part of kit: (x)
|
| Front | Spring Seat Upper Bush Kit
| SPF4091K | 1 | | $45.00 |
Spring CapSpring Seat Upper Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Bar Caster Plates
| SPF2859K | 1 | | $52.00 |
Bush, strut mountStrut Bar Caster PlatesDesigned to increase or decrease Caster by +/- 1 Degree (1 kit required per Side) - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF2858K | 1 | | $211.00 |
Control Arm-/Trailing Arm BushStrut Bar To Chassis Mount Bush Kit- Fitting Time [min.]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Top & Bearing
| SPF1590AK | 1 | | $221.00 |
Bush, strut mountStrut Top & BearingStandard Repair Upgrade Kit.
Kit contains SuperPro Hybrid Mounts, Bearings & Washers. - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Top & Bearing
| SPF1590BK | 1 | | $284.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement - LHS | TRC4005L | 1 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement - LHS 10mm Ball Joint Link
125 Degree opposed
Length 300mm - Fitting Position: Front
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement - RHS | TRC4005R | 1 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement - RHS 10mm Ball Joint Link
125 Degree opposed
Length 300mm - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10245 | 1 | | $189.50 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable Vehicle Application Information: - suits standard & FE3 Suspension
10mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2863-23K | 1 | | $48.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 23, 24, 26, 27, 28, 28.7, 29.7 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0001RZ-22 | 1 | | $ |
Sway Bar Stabiliser Kit22mm Heavy Duty 3 Position Blade Adjustable Sway BarVehicle Application Information: - Does not suit FE3 suspension
22mm Heavy Duty 3 Position Blade Adjustable Sway Bar - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | 27mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link Kit
| RC0087RZ-27 | 1 | | $487.20 |
Sway Bar Stabiliser Kit27mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link KitVehicle Application Information: - suits 6.2L (LS3, LSA) V8 Engine
- Fitting Time [min.]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF2865K | 1 | | $79.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Rear Arm, Bushing located in arm
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
| SPF2866K | 1 | | $71.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Outer Bush KitVehicle Application Information: - will not suit Vehicles with Hyme Joints
Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - will not suit Vehicles with Hyme Joints
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Upper-Rear Bush Kit
Suits Alloy Arm & Bracket | SPF4286K | 1 | | $148.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Rear Bush KitSuits Alloy Arm & Bracket Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Differential to Subframe Mount Bush Kit
| SPF2869K | 1 | | $217.00 |
Bush, differential mountDifferential to Subframe Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Enhancement Bush Kit - Rear Traction
| KIT176K | 1 | | $411.00 |
Suspension KitEnhancement Bush Kit - Rear TractionKit includes Void Fillers to suit OEM Bushes only!
Kit contains: -
Rear Differential to Subframe Mount Bush Kit -
Rear Subframe to Chassis Spacer on Front Mount Bush Kit -
Rear Subframe Top Void Filler Bush Kit -
Rear Subframe Bottom Void Filler Bush Kit - Fitting Position: Rear
- Fitting Time [min.]: 360
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Upper | SPF3247K | 1 | | $46.00 |
Spring CapSpring Seat Bush KitUpper - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Subframe to Chassis Mount Bush Kit
| SPF3918K | 1 | | $419.00 |
Bush, sub-frameSubframe to Chassis Mount Bush Kit- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Subframe to Chassis Spacer on Front Mount Bush Kit
| SPF2873K | 1 | | $54.00 |
Bush, sub-frameSubframe to Chassis Spacer on Front Mount Bush Kitreplaces original rubber bushing - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Subframe Void Filler Bush Kit
Bottom | SPF2871K | 1 | | $112.00 |
Bush, sub-frameSubframe Void Filler Bush KitBottom Vehicle Application Information: - Void Fillers to suit OEM Bushes only
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Subframe Void Filler Bush Kit
Top | SPF2872K | 1 | | $74.00 |
Bush, sub-frameSubframe Void Filler Bush KitTop Suits vehicles with voided subframe bushes Vehicle Application Information: - Void Fillers to suit OEM Bushes only
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link Vehicle Application Information: - suits V6 and 6.0L (L77) V8 Engine
10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4021 | 2 | | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement Vehicle Application Information: - suits V6 and 6.0L (L77) V8 Engine
10mm Ball Joint Link
180 Degree opposed
Length 108mm center to center - Fitting Position: Rear
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $166.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - suits V6 and 6.0L (L77) V8 Engine
- Does not suit FE3 suspension
10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC4305 | 1 | | $ |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - suits 6.2L (LS3, LSA) V8 Engine
10mm Ball Joint Adjustable Link with 12mm Vertical Ball Joint
Minimum Length 165 mm - Maximum Length 210 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount To Crossmember Bush Kit
OE Bar Size. Does not suit FE3 suspension. Measure Bar diameter as other Sizes are available 21mm, 22mm, 22.5mm, 23mm, 23.2mm, 24mm, 25mm | SPF0613-20K | 1 | | $28.00 |
Sway Bar Bush KitSway Bar Mount To Crossmember Bush KitOE Bar Size. Does not suit FE3 suspension. Measure Bar diameter as other Sizes are available 21mm, 22mm, 22.5mm, 23mm, 23.2mm, 24mm, 25mm available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF3237K | 1 | | $86.00 |
Bush, control arm mountingToe Control Arm Inner & Outer Bush KitSuits Arm without Hyme Joint - Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Bush Kit
| SPF2867K | 1 | | $118.00 |
Control Arm-/Trailing Arm BushTrailing Arm Bush KitFront Lower Arm
Kit contains front bushings located in the arm & the rear bushings in the knuckle - Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Upper Outer Control Arm Bush Kit
Hyme Joint Replacement | SPF5236K | 1 | | $58.00 |
Suspension KitUpper Outer Control Arm Bush KitHyme Joint Replacement - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
