Front and Rear | SuperPro Easy-Lift Kit
This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts & Hand Brake Bracket Mount Extension Kit | TRC185LK | 1 |  | $347.60 |
 Suspension Lift KitSuperPro Easy-Lift Kit
This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts & Hand Brake Bracket Mount Extension Kit Vehicle Application Information: - To be used with standard suspension only.
SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension. Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time. Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Camber Bolt Kit Complete set of replacement Camber Bolts | TRC0022 | 1 |  | $287.51 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Bush Kit
| SPF4032K | 1 |  | $260.03 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitKit contains front & rear position bushings Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit
| SPF4031K | 1 |  | $148.77 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitKit contains front & rear position bushings Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | ReadyStrut Top Caps suits vehicles with flat ground coil | RS005 | 2 |  | $101.33 |
Suspension Strut MountingReadyStrut Top Capssuits vehicles with flat ground coil Vehicle Application Information: - suits Vehicles from 01/2012 - 03/2013
- suits vehicles with flat ground coil
Strut Cap, Spring Seat, Nuts & Washers - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | ReadyStrut Top Caps suits vehicles with full wire coil | RS012 | 2 |  | $101.33 |
Suspension Strut MountingReadyStrut Top Capssuits vehicles with full wire coil Vehicle Application Information: - suits Vehicles from 03/2013-on
- suits vehicles with full wire coil
Strut Cap, Spring Seat, Nuts & Washers - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF3757K | 1 |  | $61.68 |
Bush, shock absorberShock Absorber Upper Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Spring Seat Upper Bush Kit
| SPF3002K | 1 |  | $68.02 |
Spring CapSpring Seat Upper Bush Kit- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Top Spacer Kit Raises vehicle approximately 10-12mm | TRC008-6 | 1 |  | $111.94 |
Spacer Sleeve, suspension strut support mountStrut Top Spacer KitRaises vehicle approximately 10-12mm OD: 125mm ID: 79mm H: 6mm Need more lift?? If you have added extra accessories to the front of your 4WD and need to correct the ride height, now SuperPro has the solution! The SuperPro Strut Spacer Kit can help with correcting lost ride height on either one side or both sides of your 4WD without having to change springs. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front | SuperPro Easy-Lift Strut Spacer Kit This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers | TRC185FLK | 1 |  | $164.97 |
Suspension Lift KitSuperPro Easy-Lift Strut Spacer KitThis kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers Vehicle Application Information: - To be used with standard height suspension only
Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Front | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1085 | 1 |  | $203.85 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit O.E Size for 2.5Lt Engine | SPF4030-28K | 1 |  | $44.34 |
Mounting, stabiliserSway Bar Mount Bush KitO.E Size for 2.5Lt Engine available Sizes 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF4030-29K | 1 |  | $44.34 |
Mounting, stabiliserSway Bar Mount Bush KitSuits OE Bar Size available Sizes 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | 20mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0031RZ-20 | 1 |  | $465.43 |
 Stabiliser Bar, chassis20mm Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package Vehicle Application Information: - Can not be used with Airbags fitted in the rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Greasable Pin and Bush Kit - Front Eye
| SPF4456K | 1 |  | $181.20 |
Bushing, leaf springGreasable Pin and Bush Kit - Front Eye- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Greasable Shackle and Bush Kit Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings | KIT185SK | 1 |  | $329.06 |
Bush, spring shackle spring carrierGreasable Shackle and Bush KitContains Greasable Shackles and Fixed Pins with all SuperPro Bushings The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD. Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle. Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Hand Brake Cable Extension Kit
| SPF4801K | 1 |  | $34.42 |
Accessory KitHand Brake Cable Extension KitRequired when fitting lifted, high load carrying leaf spring packs. - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Hand Brake Relocation Kit
| TRC0045 | 1 |  | $61.81 |
Accessory KitHand Brake Relocation Kit
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit
| KIT185K | 1 |  | $168.17 |
Bushing, leaf springLeaf Spring Bush KitKit contains: - Front Eye Bush Kit
- Rear Lower Bush Kit
- Rear Upper Shackle Bush Kit
These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 270
- Part of kit: (x)
|
Rear | Shock Absorber Upper & Lower Bush Kit suits OE Shock Absorbers | SPF2178-16K | 1 |  | $26.29 |
Bush, shock absorberShock Absorber Upper & Lower Bush Kitsuits OE Shock Absorbers A=16mm B=24.5mm C=24mm D=36mm E=30mm Double Tapered Bushing - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF2670K | 1 |  | $58.49 |
Bushing, leaf springSpring Front Eye Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Rear | Spring Rear Lower Bush Kit
| SPF2231-4K | 1 |  | $36.84 |
Bushing, leaf springSpring Rear Lower Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Spring Rear Upper Shackle Bush Kit
| SPF4040K | 1 |  | $66.30 |
Bushing, leaf springSpring Rear Upper Shackle Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|