| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  | $36.45 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard Replacement | SPF3846K | 1 | | $92.95 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard Replacement - Fitting Position: Front
 3hrs Fitment Time- Axle alignment required after fitting
 Fitment Difficulty- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction. Caster Adjustment | SPF3847K | 1 | | $118.24 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction. Caster Adjustment Vehicle Application Information: - 1.5 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 3hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction. Caster Adjustment | SPF4730K | 1 | | $116.53 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction. Caster Adjustment Vehicle Application Information: - 1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 3hrs Fitment Time
- Fitment Difficulty
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4007 | 2 |  | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm  Fitment Difficulty- 0.5hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS - Standard Replacement | TRC4019L | 2 | | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkLHS - Standard Replacement 12mm Ball Joint Link
180 Degree opposed
Length 242mm center to center  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS - Standard Replacement | TRC4019R | 2 | | $39.50 |
Sway Bar Stabiliser KitSway Bar LinkRHS - Standard Replacement 12mm Ball Joint Link
180 Degree opposed
Length 242mm center to center - Fitting Position: Front
- 0.5hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 | | $187.00 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF4556-15K | 1 | | $34.72 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 16, 18 & 21mm Vehicle Application Information: - Fitting Position: Front
- 1hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF4556-16K | 1 | | $34.72 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 16, 18 & 21mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF4556-18K | 1 | | $34.72 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 16, 18 & 21mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF4556-21K | 1 | | $34.72 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 16, 18 & 21mm Vehicle Application Information: - 1hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Beam Axle Pivot Bush Kit
| SPF4557K | 1 | | $101.15 |
Bush, beam axleBeam Axle Pivot Bush Kit- Fitting Position: Rear
- Fitment Difficulty
- 3hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
