Front and Rear | Leaf Spring Bush Kit
| KIT067K | 1 |  | $248.33 |
Bushing, leaf springLeaf Spring Bush Kithese bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 210
- Part of kit: (x)
|
Front and Rear | Radius Arms & Panhard Rods Bush Kit Up to 1989 | KIT059K | 1 |  | $744.40 |
 Mounting, control/trailing armRadius Arms & Panhard Rods Bush KitUp to 1989 Kit Contains SPF0396K x 1, SPF0397K x 1, SPF0398K x 1, SPF0399K x 4, SPF0444K x 1 As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 600
- Part of kit: (x)
|
Front and Rear | Radius Arms & Panhard Rods Bush Kit - Extra Offset Suits 75mm or More Raised Height Vehicle | KIT060ADJXK | 1 |  | $807.75 |
 Mounting, control/trailing armRadius Arms & Panhard Rods Bush Kit - Extra OffsetSuits 75mm or More Raised Height Vehicle As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit - Offset
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 600
- Part of kit: (x)
|
Front and Rear | Radius Arms & Panhard Rods Bush Kit - Standard Replacement Suits Standard Height Vehicle | KIT060K | 1 |  | $720.68 |
 Mounting, control/trailing armRadius Arms & Panhard Rods Bush Kit - Standard ReplacementSuits Standard Height Vehicle As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 600
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Lower Raises vehicle approximately 10mm | SPF4998-10K | 2 |  | $56.96 |
Spring CapCoil Spring Spacer Bush Kit - LowerRaises vehicle approximately 10mm A=160.50mm B=82mm C=10mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Upper Raises Vehicle approximately 5mm | SPF1734-5K | 2 |  | $39.35 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises Vehicle approximately 5mm A=170mm B=115mm C=5mm D=10mm E=125mm Spring Spacer will reform to shape of the coil - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Upper Raises Vehicle approximately 15mm | SPF1734K | 2 |  | $67.84 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises Vehicle approximately 15mm A=170mm B=115mm C=15mm D=10mm E=125mm Spring Spacer will reform to shape of the coil - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Upper Raises vehicle approximately 30mm | SPF2364-30K | 2 |  | $118.54 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises vehicle approximately 30mm A=170mm B=69-116mm C=30mm D=20mm E=123mm
Helical Spring Seat & Tapered ID - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Leaf Spring Bush Kit H Kits for Severe Conditions or Heavy Duty applications | SPF0978HK | 1 |  | $152.90 |
Bushing, leaf springLeaf Spring Bush KitH Kits for Severe Conditions or Heavy Duty applications Vehicle Application Information: - Cab Chassis H Kits for Severe Conditions or Heavy Duty applications
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Leaf Spring Bush Kit
| SPF0978K | 1 |  | $156.30 |
Bushing, leaf springLeaf Spring Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Lift Correction Arm Kit Left and Right Arms for Lifted Vehicles with Caster Correction | TRC1015 | 1 |  | $1349.17 |
Control Arm/Trailing Arm, wheel suspensionLift Correction Arm KitLeft and Right Arms for Lifted Vehicles with Caster Correction Raising a vehicle washes off castor and the effects of decreased castor are a loss of straight line stability, vague steering at higher speeds and can cause castor shimmy. The SuperPro Lift Correction Arm Kit solves the issues with “built in” castor correction in the design, with nearly 4 Degrees for a 50mm lift and 2.5 Degrees for a 75mm lift.
Add in more articulation by utilising the SuperPro Hybrid material and this arm becomes the only choice for on or off road use.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Front | Panhard Rod Bush Kit
| SPF0398K | 1 |  | $79.23 |
Bush, panhard rodPanhard Rod Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit Standard Replacement | SPF0396K | 1 |  | $180.55 |
Bush, radius armRadius Arm To Diff Mount Bush KitStandard Replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit - Extra Offset Suits 75mm or More Lifted Vehicles | SPF1721XK | 1 |  | $277.32 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - Extra OffsetSuits 75mm or More Lifted Vehicles Alignment Correction with extra offset for "High Lift Vehicles"
Allows up to 4 degrees Caster increase Vehicle Application Information: - Extra offset High Lift Vehicles To increase caster settings
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit - Offset Suits 50mm Raised Vehicles | SPF1721K | 1 |  | $272.74 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - OffsetSuits 50mm Raised Vehicles Alignment Correction
Allows up to 2 degrees Caster increase - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Radius Arm To Chassis Bush Kit - Setback Alignment correction kit | SPF3467K | 1 |  | $111.01 |
Bush, radius armRadius Arm To Chassis Bush Kit - Setback Alignment correction kit - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Radius Arm To Chassis Mount Bush Kit
| SPF0397K | 1 |  | $73.15 |
Bush, radius armRadius Arm To Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit – Hybrid Version Delivers superior articulation and durability
Suits Standard Height vehicles and/or Lifted vehicles fitted with aftermarket Caster increase arms. | TRC0396 | 1 |  | $339.36 |
Bush, radius armRadius Arm To Diff Mount Bush Kit – Hybrid VersionDelivers superior articulation and durability
Suits Standard Height vehicles and/or Lifted vehicles fitted with aftermarket Caster increase arms. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Shock Absorber Upper & Lower Bush Kit
| SPF0740K | 1 |  | $37.62 |
Bush, shock absorberShock Absorber Upper & Lower Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2092BK | 1 |  | $30.54 |
Bush, shock absorberSway Bar Link Bush Kit- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0626-20K | 1 |  | $33.90 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0626-22K | 1 |  | $33.90 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | 18mm Heavy Duty Non Adjustable Sway Bar
| SNR8 | 1 |  | $ |
Stabiliser Bar, chassis18mm Heavy Duty Non Adjustable Sway BarSelby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit Raises vehicle approximately 15mm | SPF1736-15K | 2 |  | $81.10 |
Spring CapCoil Spring Spacer Bush KitRaises vehicle approximately 15mm A=180mm B=120mm C=15mm D=15mm E=140mm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit Raises vehicle approximately 30mm | SPF1736-30K | 2 |  | $135.99 |
Spring CapCoil Spring Spacer Bush KitRaises vehicle approximately 30mm A=180mm B=120mm C=30mm D=15mm E=140mm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit Raises Vehicle approximately 5mm | SPF1736-5K | 2 |  | $39.44 |
Spring CapCoil Spring Spacer Bush KitRaises Vehicle approximately 5mm A=180mm B=120mm C=5mm D=15mm E=140mm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit 1989 model on | SPF0398K | 1 |  | $79.23 |
Bush, panhard rodPanhard Rod Bush Kit1989 model on - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit Up to 1989 model | SPF0444K | 1 |  | $105.60 |
Bush, panhard rodPanhard Rod Bush KitUp to 1989 model Vehicle Application Information: - Up to 1989 model Use SPF0398K 1989 on
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Shock Absorber Lower Bush Kit
| SPF2755LK | 1 |  | $26.43 |
Bush, shock absorberShock Absorber Lower Bush Kit- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All H Kits for Severe Conditions or Heavy Duty applications, New design to suit greasable shackles | SPF2260HK | 1 |  | $126.12 |
Bushing, leaf springSpring Rear Bush Kit AllH Kits for Severe Conditions or Heavy Duty applications,New design to suit greasable shackles Vehicle Application Information: - 35mm OD Bush
- H Kit for Severe Conditions or Heavy Duty applications
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All New design to suit greasable shackles | SPF2260K | 1 |  | $119.60 |
Bushing, leaf springSpring Rear Bush Kit AllNew design to suit greasable shackles Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF2092B-4K | 1 |  | $18.46 |
Mounting, stabiliserSway Bar Link Bush Kitre-use all original washers - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Measure bar diameter 15, 18, 20, 22, 24mm available | SPF0627-17K | 1 |  | $38.37 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 15,18,20,22,24mm available - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Measure bar diameter 15, 18, 20, 22, 24mm available | SPF0627-18K | 1 |  | $38.37 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 15,18,20,22,24mm available - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit
| SPF0399K | 2 |  | $97.14 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit
| SPF0399K | 2 |  | $97.14 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|