Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10245 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF2137K | 1 | | $96.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitVehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF2138K | 1 | | $508.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4041 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
180 degree opposed
240mm center to center Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2305K | 1 | | $169.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2140-21K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit after-market round sway bar
available sizes 21 & 22mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2561K | 1 | | $101.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit 21mm factory bar with flats at bush mounting point
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower Assembly Kit
| TRC1148 | 1 | | $154.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitIncludes left and right arms and all bushings Our rear lower control arm kit is designed to provide a hassle-free repair and enhancement solution. It offers substantial benefits in terms of alignment and vehicle handling, serving as more than just a repair option – it's a genuine upgrade! Delivered as a comprehensive kit, it comes fully assembled with top-quality SuperPro bushings, making TRC1048 unquestionably the superior choice available in the market. Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Blade Control Arm Front Kit
| SPF3466K | 1 | | $275.00 |
Mounting Kit, control/trailing arm mountingBlade Control Arm Front KitVehicle Application Information: - to suit vehicles from 09/2002 to 05/2005
Vehicle Application Information: - don't remove original shell
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Inner & Outer Bush Kit
| SPF2324K | 1 | | $193.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner & Outer Bush KitRear Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper Assembly Kit
| TRC1149 | 1 | | $185.00 |
Control/Trailing Arm, wheel suspensionControl Arm Upper Assembly KitIncludes left and right arms and all bushings Our rear upper control arm kit has been designed to be an easy repair upgrade solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with SuperPro bushings. We have made TRC1149 by far the best choice on the market. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2325K | 1 | | $153.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Double Offset
| SPF2326K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - to be used in this position when SPF2326K is already used in the outer position and 2 degrees camber adjustment in total required
- 1 degree of camber adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit - Double Offset
| SPF2326K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush Kit - Double OffsetVehicle Application Information: - preferred position to gain 1 degree camber change
- 1 degree of camber adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2141-21K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit after-market round sway bar
available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2141-22K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit after-market round sway bar
available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2578K | 1 | | $82.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit 21mm factory bar with flats at bush mounting point
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Toe Control Arm Lower Inner & Outer Bush Kit
| SPF2323K | 1 | | $233.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Lower Inner & Outer Bush KitFront Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|