| Front and Rear | Enhancement Bush Kit
BF Series 2 only | KIT139BFK | 1 |  | $1866.28 |
Mounting, control/trailing armEnhancement Bush KitBF Series 2 only Kit contains: - Front Camber Caster Adjusting Kit
- Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Blade Control Arm Front Kit
- Rear Control Arm Upper-Inner Bush Kit - Double Offset
- Rear Bump Stop Bush Kit
- Rear Differential Centre Rear Support Bush Kit - SuperPro Hybrid
- Rear Differential Pinion Bracket Mount Bush Kit - SuperPro Hybrid
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 840
- Part of kit: (x)
|
| Front and Rear | Enhancement Bush Kit
BA to BF Series 1 only | KIT139K | 1 | | $1762.02 |
Mounting, control/trailing armEnhancement Bush KitBA to BF Series 1 only Kit contains: - Front Camber Caster Adjusting Kit
- Front Control Arm Lower-Inner
- Front Bush Kit Front Control Arm Lower-Inner Rear Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Blade Control Arm Front Kit
- Rear Control Arm Upper-Inner Bush Kit - Double Offset
- Rear Bump Stop Bush Kit
- Rear Differential Centre Rear Support Bush Kit
- Rear Differential Pinion Bracket Mount Bush Kit - SuperPro Hybrid
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 960
- Part of kit: (x)
- Front and Rear
- KIT139K
- 1
- 17T,8S,4BR,2BS,21B
- SuperPro Vehicle Kit
- $1762.02
- More Info
- BUY NOW
|
| Front | Bump Stop Bush Kit
| SPF2044K | 1 |  | $48.87 |
Bump StopBump Stop Bush Kit2 x Bump Stops & 2 x Caps per Kit
50mm Long x 56.3 Wide x 14-18mm Inside Diameter - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Kit
| SPF1600-V8K | 2 | | $198.43 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitTo suit V8 & XR6
Note: Mounting nuts inside guard, kits include shim plates. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Kit
| SPF1600K | 2 | | $166.79 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitIncludes shims - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Kit
| SPF1600SL-V8K | 2 | | $194.83 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitVehicle Application Information: - Super low option Includes shims
To suit V8 & XR6
Note: Mounting nuts inside guard, kits include shim plates. Vehicle Application Information: - Super low option Includes shims
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Kit
| SPF1600SLK | 2 | | $174.80 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitSuper low option
Includes shims - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Shim Kit
| SPF1600-1.6SK | 1 | | $34.63 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit1.6 mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Shim Kit
| SPF1600-3SK | 1 | | $55.33 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit3mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Camber Caster Adjusting Shim Kit
| SPF1600-6SK | 1 | | $71.57 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit6mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
Lower position, OE strut only, raises vehicle approx. 14mm | SPF2283-10K | 1 | | $71.07 |
Spring CapCoil Spring Spacer Bush KitLower position, OE strut only, raises vehicle approx. 14mm A=101mm B=52.6mm C=10mm D=31.5mm E=70.4mm, Helical Spring Seat Vehicle Application Information: - Lower position OE strut only Raises vehicle 14mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit
Lower position, OE strut only, raises vehicle approx. 28mm | SPF2283-20K | 1 | | $99.85 |
Spring CapCoil Spring Spacer Bush KitLower position, OE strut only, raises vehicle approx. 28mm A=101mm B=52.6mm C=20mm D=31.5mm E=70.4mm, Helical Spring Seat - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower Assembly Kit
Standard replacement | TRC1103 | 1 |  | $712.89 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitStandard replacement Left and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Ford AU, BA & BF series has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1103 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material.
By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH.
SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF1838K | 1 | | $194.70 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
| SPF1839K | 1 | | $108.04 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Alignment Bush Kit
| KIT199K | 1 | | $376.03 |
Mounting, control/trailing armControl Arm Upper-Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Standard Height Vehicles Kit contains: - Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 270
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Alignment Bush Kit
| KIT200K | 1 | | $390.46 |
Mounting, control/trailing armControl Arm Upper-Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Lowered Vehicles Kit contains:- Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit - Super Low Option
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 270
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
| SPF1887K | 1 | | $84.22 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Kit
| SPF0299K | 1 | | $64.81 |
Bush, shock absorberShock Absorber Lower Bush KitBush located in lower control arm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF2527K | 1 | | $43.81 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitLHS only
Re-use OE crush tube
RHS solid mount metal bush - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Strut Top Cap
| RS008 | 2 | | $116.66 |
Suspension Strut MountingStrut Top Cap- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
LHS | TRC4009L | 1 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkLHS 10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
RHS | TRC4009R | 1 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkRHS 10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
| SPF3231-18K | 1 | | $52.25 |
Mounting, stabiliserSway Bar To Chassis Bush KitMeasure bar diameter 18, 23, 24, 25, 26, 27, 28, 30 & 31mm available Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
Suits O.E Sway Bar | SPF3231-23K | 1 | | $52.25 |
Mounting, stabiliserSway Bar To Chassis Bush KitSuits O.E Sway Bar Measure bar diameter 18, 23, 24, 25, 26, 27, 28, 30 & 31mm available Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar To Chassis Bush Kit
Suits XR6 O.E Sway Bar | SPF3231-24K | 1 | | $52.25 |
Mounting, stabiliserSway Bar To Chassis Bush KitSuits XR6 O.E Sway Bar Measure bar diameter 18, 23, 24, 25, 26, 27, 28, 30 & 31mm available Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Blade Control Arm Front Kit
Competition use
Remove original shell for fitment | SPF3182K | 1 | | $423.90 |
Mounting Kit, control/trailing arm mountingBlade Control Arm Front KitCompetition use
Remove original shell for fitment - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Blade Control Arm Front Kit
Standard replacement
Remove original shell for fitment | SPF3229K | 1 | | $275.80 |
Mounting Kit, control/trailing arm mountingBlade Control Arm Front KitStandard replacement
Remove original shell for fitment - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Blade Control Arm Kit
Left and Right Replacement Arms for Repair or Performance Upgrade | TRC1012 | 1 | | $447.77 |
 Control Arm/Trailing Arm, wheel suspensionBlade Control Arm KitLeft and Right Replacement Arms for Repair or Performance Upgrade The Ford Falcon & Territory Rear Blade Bushing has proven to be a big problem with severe durability, ride and handling problems.
The Blade Arm Bushing essentially pushes the car forward and stops the car during braking.
It sees extremely high loads in excess of 15KN.
The Original Ford Blade bush is soft in all directions, which is not good for performance and durability, now there is a far superior option.
SuperPro Blade Arm can: - Eliminate the acceleration lag due to soft bushes, resulting in a more responsive car, with better traction and a more positive braking feel.
- Offer a progressive rate bushing, which for the end consumer can be summed up as a plush ride through the suburbs with a 'sports performance' experience at the wheel when you need it.
- Deliver massive durability increase and superior value for money.
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Bump Stop Bush Kit
To suit lowered & standard height vehicles | SPF2787K | 1 | | $56.08 |
Bump StopBump Stop Bush KitTo suit lowered & standard height vehicles Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Lower-Inner Bush Kit
| SPF3142K | 1 | | $120.19 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitBushing located in larger arm which coil spring is located on Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Control Arm Lower-Outer Bush Kit
Bushing located in hub; Larger arm which coil spring is located on. | SPF3234K | 1 | | $165.40 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitBushing located in hub; Larger arm which coil spring is located on. Replacement Hyme joint
46.9mm housing - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Control Arm Upper Assembly Kit
Complete Arm Assemblies with Standard SuperPro Bushings | TRC1106 | 1 | | $377.06 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Upper Assembly KitComplete Arm Assemblies with Standard SuperPro Bushings Left and Right Arms for Standard Replacement and Repair Upgrade - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF3187K | 1 | | $92.97 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement
Remove original shell before fitment Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
Up to 1 degree +/- adjustment. | SPF2413K | 1 | | $211.05 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetUp to 1 degree +/- adjustment. This kit is designed for a lowered vehicle. Once lowered, these vehicles do not have enough adjustment in the factory camber adjusters to correct the resulting negative camber. Being offset allows the length of this arm to be altered and, once installed, increases the range of the factory adjustment. It is advisable to carry out a wheel alignment prior to fitment and follow the fitting instructions to achieve the desired outcome.
Control arm bushes also stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
SuperPro Bushing solve this issue as and add the ability to 'tune' the wheel alignment to suit the specific requirements of vehicle and driver. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
Bushing located in arm | SPF3233K | 1 | | $167.18 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush KitBushing located in arm Replacement Hyme Joint
40mm housing - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support & Pinion Bracket Mount Void Filler
suits BA 6 cylinder non turbo | SPF4677K | 1 | | $82.90 |
Mounting, differentialDifferential Centre Rear Support & Pinion Bracket Mount Void Fillersuits BA 6 cylinder non turbo - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Bush Kit
BA to BF Series I up to 04/2006 only | SPF2654-70K | 1 | | $115.38 |
Bush, differential mountDifferential Centre Rear Support Bush KitBA to BF Series I up to 04/2006 only 75mm OD
Comfort Option
Bushing mounted in Sub Frame Vehicle Application Information: - Bolt Hole off-center
- Steel outer shell type replacement bushing
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: KIT187K (x1)
|
| Rear | Differential Centre Rear Support Bush Kit
BA to BF Series I up to 04/2006 only | SPF2654K | 1 | | $125.68 |
Bush, differential mountDifferential Centre Rear Support Bush KitBA to BF Series I up to 04/2006 only 75mm OD
Sports/Performance Option
Bushing mounted in Sub Frame Vehicle Application Information: - Bolt Hole off-center
- Steel outer shell type replacement bushing
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Differential Centre Rear Support Bush Kit - SuperPro Hybrid
Suits BF Series II 05/2006 -on | SPF3232PK | 1 | | $231.22 |
Mounting, differentialDifferential Centre Rear Support Bush Kit - SuperPro HybridSuits BF Series II 05/2006 -on 90mm OD
Standard & Performance option with Hybrid Technolgy
Bushing mounted in Subframe SuperPro Hybrid Bushings are the most technologically advanced Differential Bushings ever produced. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Differential Pinion Bracket Mount Bush Kit - SuperPro Hybrid
Bushing mounted in subframe.
Standard & Performance option with Hybrid Technolgy | SPF3148PK | 1 | | $402.69 |
Mounting, differentialDifferential Pinion Bracket Mount Bush Kit - SuperPro Hybrid
Bushing mounted in subframe.
Standard & Performance option with Hybrid Technolgy SuperPro Hybrid Bushings are the most technologically advanced Differential Bushings ever produced. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Rear | Differential Pinion Bracket Mount Void Filler
Suits BF 6 cylinder Non Turbo | SPF4681K | 1 | | $60.59 |
Mounting, differentialDifferential Pinion Bracket Mount Void FillerSuits BF 6 cylinder Non Turbo - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Differential Support Bush Kit - Performance Option
BA to BF Series I up to 04/2006 | KIT197K | 1 | | $475.53 |
Mounting, differentialDifferential Support Bush Kit - Performance OptionBA to BF Series I up to 04/2006 Kit contains: - Rear Differential Pinion Bracket Mount Bush Kit
- Rear Differential Centre Rear Support Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Differential Support Bush Kit - Standard Option
BA to BF Series I up to 04/2006 | KIT187K | 1 | | $466.26 |
Mounting, differentialDifferential Support Bush Kit - Standard OptionBA to BF Series I up to 04/2006 Kit contains: - Rear Differential Pinion, Bracket Mount Bush Kit
- Rear Differential Centre Rear Support Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Differential Support Bush Kit - SuperPro Hybrid
Suits BF Series II 05/2006-on | KIT210K | 1 | | $549.57 |
Mounting, differentialDifferential Support Bush Kit - SuperPro HybridSuits BF Series II 05/2006-on SuperPro Hybrid Bushings are the most technologically advanced Differential Bushings ever produced.Kit contains: - Differential Pinion Bracket Mount Bush Kit
- Differential Centre Rear Support Bush Kit
Standard & Performance option with SuperPro Hybrid Technolgy.
All Bushings mounted in subframe. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Shock Absorber Upper Bush Kit
Sedan Original shock only | SPF2251K | 1 | | $66.67 |
Bush, shock absorberShock Absorber Upper Bush KitSedan Original shock only - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Raises vehicle aprox 10mm | SPF3183-10K | 2 | | $225.70 |
Spring CapSpring Seat Bush KitRaises vehicle aprox 10mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Raises vehicle aprox 5mm | SPF3183-5K | 2 | | $190.97 |
Spring CapSpring Seat Bush KitRaises vehicle aprox 5mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Spring Seat Bush Kit
Standard replacement
2 x kits required for top & bottom | SPF3183K | 2 | | $152.44 |
Spring CapSpring Seat Bush KitStandard replacement
2 x kits required for top & bottom - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4001 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
Upper Bushes Only | SPF4802BK | 1 | | $44.55 |
Stabiliser Bar, chassisSway Bar Link Bush KitUpper Bushes Only - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF4802K | 1 | | $99.79 |
Stabiliser Bar, chassisSway Bar Link Bush Kit- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1615-27K | 1 | | $41.29 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1615-28K | 1 | | $41.29 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1615-30K | 1 | | $41.29 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner Bush Kit
Smaller pressed metal front arm | SPF3187K | 1 | | $92.97 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner Bush KitSmaller pressed metal front arm Standard replacement
Remove original shell before fitment Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Toe Control Arm Outer Bush Kit
Bushing located in arm | SPF3233K | 1 | | $167.18 |
Mounting Kit, control/trailing arm mountingToe Control Arm Outer Bush KitBushing located in arm Replacement Hyme Joint
40mm housing - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
