Front and Rear | Performance Sway Bar Upgrade Kit 26mm and 24mm Front and Rear 2 Point Adjustable Sway Bars | RCVAG052KIT | 1 |  | $1053.41 |
 Stabiliser Bar, chassisPerformance Sway Bar Upgrade Kit26mm and 24mm Front and Rear 2 Point Adjustable Sway Bars Kit includes Front and Rear Sway Bars and Heavy Duty High Articulation Sway Bar Links The SuperPro Roll Control two position adjustable front sway bar is 26mm solid and the rear is a two position adjustable 24mm solid sway bar.
Add in the SuperPro Adjustable sway bar links to: - eliminate sway bar link flex
- maintain neutral sway bar positioning
- maximize all positions on the adjustable Sway Bars
All this adds up to a vehicle that is a balanced upgrade by assisting tyre grip and this becomes an ultimate handling package upgrade. From all our testing, this what we recommend as a good starting point: - Stage one is to set both bars to the hardest setting and is ideally suited to a vehicle with standard suspension, wheels and tyres.
- Stage two is to set the front to the soft setting and the rear to the hardest setting and is ideally to a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Stage three is to set both bars to the soft setting and is ideally suited to a vehicle with fitted with a coil over kit or sports suspension pack.
This SuperPro Roll Control Sway Bar Kit will make the suspension system and tyres perform better, making the car more responsive while delivering more grip.
It is the best dollar for dollar handling improvement you can make! - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Fitting Time [min.]: 300
- Part of kit: (x)
|
Front | 26mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0052FZ-26 | 1 |  | $392.38 |
Stabiliser Bar, chassis26mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | 26mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link Kit Includes Heavy Duty, High Articulation Sway Bar Links | RC0052FZ-26KIT | 1 |  | $587.98 |
Stabiliser Bar, chassis26mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link KitIncludes Heavy Duty, High Articulation Sway Bar Links - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit suits vehicles with steel hub only | TRC1070 | 1 |  | $329.93 |
 Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Assembly Kitsuits vehicles with steel hub only The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Complete Alloy Assembly with DuroBall Left and Right Performance Arm Kit with Caster increase | ALOY0018K | 1 |  | $1042.81 |
Control Arm/Trailing Arm, wheel suspensionControl Arm Lower Complete Alloy Assembly with DuroBallLeft and Right Performance Arm Kit with Caster increase Vehicle Application Information: - 1 Degree Positive Caster Change per Side. Up to 0.5 Degrees Negative Camber Change. Please read fitting Instructions
Caster Increase Alloy Arm with DuroBall Rear Bushing & built in Camber Change SuperPro Alloy Control Arm Assemblies deliver more caster, camber and eliminates unwanted flex.
Fitted with the SuperPro DuroBall rear bushing and for maximum arm control, this arm is the best upgrade available! SuperPro Tip: Care needs to be taken with aggressively lowered vehicles with non standard tyre and wheel packages to avoid tyre/guard contact. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit
| SPF4175K | 1 |  | $97.33 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit Standard Replacement | SPF4176K | 1 |  | $193.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitStandard Replacement Suits vehicles with vertically mounted lower Control Arm Bush - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit - Double Offset Double Caster Offset | SPF4178K | 1 |  | $193.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Double OffsetDouble Caster Offset Vehicle Application Information: - up to 2 degrees caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results!Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit - Single Offset Single Caster Offset | SPF4177K | 1 |  | $193.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush Kit - Single OffsetSingle Caster Offset Vehicle Application Information: - 1 degree caster adjustment available
Suits vehicles with Vertical Control Lower Arm Rear Mounting Bolt
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Strut Mounts - Offset with Extra Camber
| TRC5000 | 1 |  | $453.65 |
Suspension Strut MountingStrut Mounts - Offset with Extra Camber1 Degree Extra Camber built into the top mount - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4048 | 2 |  | $42.32 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 12mm Ball Joint Link
90 Degree opposed
Length 334mm center to center - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable Adjustable, Heavy Duty, High Articulation Sway Bar Links | TRC4301 | 1 |  | $255.70 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty AdjustableAdjustable, Heavy Duty, High Articulation Sway Bar Links - Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar Recommended for Road Use | RC0052RZ-22 | 1 |  | $318.14 |
Stabiliser Bar, chassis22mm Heavy Duty 2 Position Blade Adjustable Sway BarRecommended for Road Use - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar & Link Kit Includes Heavy Duty, High Articulation Sway Bar Links | RC0052RZ-22KIT | 1 |  | $478.40 |
Stabiliser Bar, chassis22mm Heavy Duty 2 Position Blade Adjustable Sway Bar & Link KitIncludes Heavy Duty, High Articulation Sway Bar Links - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar Recommended for Performance Use | RC0052RZ-24 | 1 |  | $331.11 |
Stabiliser Bar, chassis24mm Heavy Duty 2 Position Blade Adjustable Sway BarRecommended for Performance Use - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar & Link Kit Includes Heavy Duty, High Articulation Sway Bar Links | RC0052RZ-24KIT | 1 |  | $490.18 |
Stabiliser Bar, chassis24mm Heavy Duty 2 Position Blade Adjustable Sway Bar & Link KitIncludes Heavy Duty, High Articulation Sway Bar Links - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Control Arm Lower-Front Outer Bush Kit
| SPF4180K | 1 |  | $139.86 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit High Performance version | SPF4181-90K | 1 |  | $155.73 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitHigh Performance version - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF4181K | 1 |  | $134.27 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Front Bush Kit
| SPF3350-90K | 1 |  | $141.91 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitHigh Performance Version - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Front Bush Kit
| SPF3350K | 1 |  | $138.75 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit
| SPF4426K | 1 |  | $83.51 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit
| SPF4193K | 1 |  | $119.12 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper-Outer Bush Kit
| SPF4194K | 1 |  | $107.35 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Sway Bar Link Kit Heavy Duty, High Articulation Sway Bar Links | TRC4300 | 1 |  | $202.68 |
Link/Coupling Rod, stabiliserSway Bar Link KitHeavy Duty, High Articulation Sway Bar Links - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4183-23K | 1 |  | $53.11 |
Mounting, stabiliserSway Bar Mount Bush Kitavailable Sizes 22, 23, & 25mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit High Performance Version | SPF4195-90K | 1 |  | $185.80 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush KitHigh Performance Version - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF4195K | 1 |  | $150.21 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|