Tap to Search Parts or Vehicles


SuperPro Control Arm Bush Kit for
HYUNDAI SANTA FE 2012-2018 - DM 141 AWD Petrol Engine 09/12-03/18

Part Information

Show/Hide

Mounting Kit, control/trailing arm mounting

SuperPro Control Arm Bush Kit

Product Specifications:

  • Components Per Product: 6B,2S,2T

Vehicle Application Information:

  • There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.

Please check OD before ordering!

Some Hyundai/Kia models may require a 70mm OD Bush.

Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3808K.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.

Vehicle Application Information:

  • Steering Pull Correction Kit
  • 66mm OD
  • alignment correction
  • Axle alignment required after fitting
  • Fitting time [min]: 180
  • Fitting Position: Front
  • Fitting Difficulty: difficult