Mounting Kit, control/trailing arm mounting
SuperPro Control Arm Bush Kit
Product Specifications:
- Components Per Product: 2B,2T
These bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time.
Vehicle Application Information:
- Steering Pull Correction Kit
- alignment correction
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180