Tap to Search Parts or Vehicles
SuperPro 4x4 Control arms

 

 

A Complete Adjustable 4x4 Wheel Alignment Solution - Upper & Lower Control Arm Kits  

When you get a lift kit installed, you deserve the best. Why do half the job correcting your wheel alignment with a control arm that only offers static caster correction? Get the job done properly with SuperPros fully adjustable 4x4 control arms! Our arms come with complete camber and caster control. Designed to give your 4WD the best wheel alignment settings and increased clearance.

We have complete 'Control Arm Kits' for a wide range of vehicles, including upper and lower control arms; 

 

Learn More...


 

TRC470

FOTON TUNLAND P201 4WD - 2012-on

TOYOTA HILUX 4WD - 2005-2015

TOYOTA HILUX GGN, GUN 4WD - 2015-on

Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings

Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota arms.

They are built tough in Australia using high strength, OE grade Aussie steel.

 

Key Features

  • Increased articulation, perfect for the off road environment
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia 

 

 

TRC480

LEXUS GX GX460 (J150) - 2009-on

LEXUS GX GX470 (J120) - 2001-2009

TOYOTA FJ CRUISER GJS15 - 08/2009-on

TOYOTA FORTUNER GUN156 4WD - 10/2015-on

TOYOTA LAND CRUISER PRADO 120 Series - 2002-2010

TOYOTA LAND CRUISER PRADO 150 Series - 2010-on

 

Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings

Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota arms.

They are built tough in Australia using high strength, OE grade Aussie steel.

 

Key Features

  • Increased articulation, perfect for the off road environment
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia 

trc485

 

TRC485

LEXUS LX LX570 (J200) - 2007-on

TOYOTA LAND CRUISER 200 Series - 2007-on

Supplied with Camber & Caster Adjustable Greaseable Ball Joints. Fitted with SuperPro Bushings

Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota arms.

They are built tough in Australia using high strength, OE grade Aussie steel.

 

Key Features

  • Increased articulation, perfect for the off road environment
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia

 

 

TRC560

FORD EVEREST UA - 2015-on

FORD RANGER PX (T6) 2011- 05/2015

FORD RANGER PX II - 06/2015-on

MAZDA BT-50 UP - 2011-2015

MAZDA BT-50 UR - 2015-on

Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings

Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota arms.

They are built tough in Australia using high strength, OE grade Aussie steel.

 

Key Features

  • Increased articulation, perfect for the off road environment
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia 

TRC470

TRC540

NISSAN NAVARA D40 - 2005-2014

NISSAN NAVARA NP300 4WD Dual Cab - 2015-on

NISSAN NAVARA NP300 4WD Single & King Cab - 2015-on

NISSAN PATHFINDER R51 - 2005-2013

Supplied with Camber & Caster Adjustable Ball Joints. Fitted with SuperPro Bushings

Getting the correct alignment is no longer a problem and the design of these Arms overcome clearance issues.

These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.

Not only do these arms provide for better wheel alignment settings, they have been designed to include increased clearance between the arm and strut at full droop.

Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota arms.

They are built tough in Australia using high strength, OE grade Aussie steel.

 

Key Features

  • Increased articulation, perfect for the off road environment
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings
  • Made in Australia 

 

 

TRC500

MITSUBISHI TRITON MQ - 2015-on

Although not adjustable, the SuperPro O.E Style arm has been designed to correct camber, caster, droop and clearance problems on a lifted Triton.

 

Key Features

  • In-built camber and caster change to suit lifted vehicle
  • Increased clearance between spring and Control Arm at full articulation
  • In-built droop increase to allow an even all round vehicle lift
  • Designed with FEA to exceed O.E specifications for strength and durability
  • OE Quality ball joint
  • Includes SuperPro Bushings
  • Built tough in Australia using high strength, OE grade Aussie steel.

 

 

Check out our whole range on Tradeview. 

Find your local SuperPro Dealer.