Tap to Search Parts or Vehicles

Header

At last there is a high quality, cost effective solution for the ongoing issue of seized camber bolts in a Toyota Hilux 4WD.

SuperPro has released a complete set of front lower control arm camber bolts to solve this very issue, each kit contains one vehicle set.

The originals seize for many reasons and when this happens it makes replacing bushes, ball joints and performing a wheel alignment a nightmare!

 

Features & Benefits

  • High Quality Steel
  • Fully machined
  • Reduced shank for corrosion resistance
  • Exceeds O.E specifications

A must have product for the shelf for any workshop/wheel aligner that works with these vehicles.

Published in New Products
Tuesday, 23 February 2016 05:13

SuperPro Ezy-Lift Kit

 Top image - lift kit

This great new product from SuperPro is the ideal, cost effective way to obtain more ground clearance from a newer model 4WD utility. Designed to work only with standard suspension, these new kits have been carefully designed to meet all vehicle modification requirements set down in current legislation, in all states and territories. 

  • Easy to fit
  • Cost Effective
  • Comply with legislation

 

READ THE FULL ARTICLE

 

For more info on the compliance with the  current Australian legilation, check out this article

Tuesday, 23 February 2016 01:16

Are Spacer Lift Kits Legal in Australia?

 Top image - lift kit

 

SuperPro acknowledge spacer lifts have an ugly past. Typically they have not been properly engineered or tested by the manufacturers/importer. We have also seen manufacturers make these kits to lift vehicles beyond a safe or legal lift. SuperPro has done the engineering work to get these kits right! We have incorporated each vehicles suspension geometry into the design of every kit including consideration of the solid height to ensure the shock absorber does not bottom out before it strikes the bump stop. The lift height of each kit is unique and the associated hardware is designed and engineered to be safe and legal. No other spacer lifts on the market achieve what SuperPro has. 

Published in SuperPro Tech Updates
Sunday, 24 January 2016 23:31

SuperPro Ezy-Lift - 4WD Lift Kits

 Top image - lift kit

SuperPro Roll Control Ezy-Lift Kits are a great new product and is the easy way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension.

Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension.

So, if you are looking for a little more ground clearance, this is an easy, cost effective way to do it!

These kits come complete with everything that is required, including comprehensive fitting instructions to ensure the right outcome every time.

SuperPro even supplies the hardware to lengthen brake hose and ABS cable mounts where required.

 

Are Space lift kit legal in Australia? Read about the compliance of the SuperPro Ezy Lift kit 

 

Part No: TRC096LKTRC141LKTRC143LKTRC168LKTRC185LK

 



TRC096LK

Toyota Hilux 4WD - 02/2005-2015

Front & Rear SuperPro Easy-Lift Kit

This kit will lift the vehicle approx. 45mm and retains the standard suspension.

Kit contains:

  • 2 Front Strut Spacers
  • 2 Rear Raising Blocks
  • 4 U Bolts
  • Brake Hose Extension Kit?

To be used with standard height suspension only.

Strongly recommend to fit longer travel shock absorbers on the rear.

 

TRC096LK

TRC141LK

Nissan Navara D40 - 2005-2014

Front & Rear SuperPro Easy-Lift Kit

This kit will lift the vehicle approx. 35mm and retains the standard suspension.

Kit contains:

  • 2 Front Strut Spacers
  • 2 Rear Raising Blocks
  • 4 U Bolts

To be used with standard height suspension only.

Recommend TRC540 or SPF3024K be fitted to single position Camber/Caster adjustment models for correct camber adjustment.

 

TRC141LK

TRC143LK

Mitsubishi Triton ML, MN - 2006-2015

Front & Rear SuperPro Easy-Lift Kit

This kit will lift the vehicle approx. 25mm and retains the standard suspension.

Kit contains:

  • 2 Front Strut Spacers
  • 2 Rear Raising Blocks
  • 4 U Bolts.

To be used with standard height suspension only.

 

TRC143LK

TRC168LK

Ford Ranger PX (T6) 2011-on

Mazda BT-50 B22, B32 - 2011-on

Front & Rear SuperPro Easy-Lift Kit

This kit will lift the vehicle approx. 45mm and retains the standard suspension.

Kit contains:

  • 2 Front Strut Spacers
  • 2 Rear Raising Blocks
  • 4 U Bolts.

To be used with standard height suspension only.

 

TRC168LK.142028

TRC185LK

Holden Colorado RG Tdi - 2012-on

Isuzu D-Max MP Tdi 4x4 2012 on

This kit will lift the vehicle approx. 45mm and retains the standard suspension.

Kit contains:

  • 2 Front Strut Spacers
  • 2 Rear Raising Blocks
  • 4 U Bolts
  • Hand Brake Bracket Mount Extension Kit

To be used with standard height suspension only.

TRC185LK.142042

Published in New Products