Tap to Search Parts or Vehicles
Standard Content

Standard Content (60)

Following on from the success of the Ford and Toyota range of Adjustable Upper Control Arms SuperPro is pleased to announce the release of the Nissan Navara

D40, NP300 and Nissan Pathfinder R51 Adjustable Upper Control Arms.


Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the manufacturing method developed and refined with the Ford and Toyota

arms.They are built tough in Australia using high strength, OE grade Aussie steel.


TRC540 3


Getting the correct alignment is no longer a problem and the design of these  Arms overcome clearance issues. These arms deliver up to 3 degree of caster along with

extra camber, allowing for the optimum alignment settings for a 2” lifted vehicle. Not only do these arms provide for better wheel alignment settings, they have been

designed to include increased clearance between the arm and strut at full droop.


Available from 18.04.2017


Key Features           

  • Increased articulation, perfect for the off road environment
  • In-built camber and caster change to suit lifted vehicle
  • Provides for camber and caster adjustment using an adjustable ball joint
  • Increased clearance between spring and Control Arm at full articulation
  • SuperPro Bushings​
  • Made in Australia


Learn more on Tradeview

Tuesday, 14 February 2017 00:25

New Releases December 2016

Written by

Here is a list of all the Products we have Released in December 2016



SuperPro has got you covered!






SPF4653K Control Arm Lower-Inner Rear Bush & Bracket Kit

Standard Replacement

Ford Focus MK2 RS/ST 2004-2011
Ford Focus Mk2 LS, LT, LV - 2005-2011
Ford C-Max Mk1 - 2003-2010
Ford Kuga Series I 2008-2012
Mazda 3 BK - 2003-2009
MazdaSpeed 3 3 BK MPS - 2006-2009
Mazda 5 CR19 - 2005-on
Volvo C30 Mk I - 2006-on
Volvo C70 Mk II - 2006-on
Volvo S40 MS - 2004-on
Volvo V50 MW - 2004-on


SPF2348PK Shock Absorber Lower Bush Kit

Utilises superior Polyelast material for massive increase in durability in all applications

Toyota Fortuner GUN156 4WD - 10/2015-on
Toyota Hilux 4WD - 2005-2015
Toyota Hilux GGN, GUN 4WD - 2015-on
Toyota Prado 120 Series - 2002-2010
Toyota Prado 150 Series - 2010-on


SPF4894K Differential Mount Bush Kit

Chevrolet Corvette C4 - 1985-1997


SPF4857K Differential Mount Bushing Kit - Rear

Standard Replacement

Toyota Supra JZA80 - 1993-2002 - Turbo
Toyota Soarer _Z3_ - 1990-2000
Toyota Aristo JZS147 - 1993-1996
Lexus GS JZS147 - 1993-1997
Lexus GS UZS161, JZS160 - 1997-2000
Lexus GS UZS161, JZS160 - 10/2000-3/2005
Lexus GS S190 2005-2011
Lexus IS GSE2_, ALE2_, USE2_ - 2005-2013
Lexus IS C GSE2_ - 2009-on
Lexus IS F GSE2_ - 2009-on
Lexus LS UCF10 - 1989-1997
Lexus LS UCF30 - 2000-2006
Lexus SC JZZ31 - 1992-2000
Lexus SC UZZ30 - 1991-2000



SPF4857K Differential Mount Bushing Kit - Rear

High Performance Option

Toyota Supra JZA80 - 1993-2002 - Turbo
Toyota Soarer _Z3_ - 1990-2000
Toyota Aristo JZS147 - 1993-1996
Lexus GS JZS147 - 1993-1997
Lexus GS UZS161, JZS160 - 1997-2000
Lexus GS UZS161, JZS160 - 10/2000-3/2005
Lexus GS S190 2005-2011
Lexus IS GSE2_, ALE2_, USE2_ - 2005-2013
Lexus IS C GSE2_ - 2009-on
Lexus IS F GSE2_ - 2009-on
Lexus LS UCF10 - 1989-1997
Lexus LS UCF30 - 2000-2006
Lexus SC JZZ31 - 1992-2000
Lexus SC UZZ30 - 1991-2000


SPF4858K Differential Mount Bushing Kit - Rear

Standard Replacement

Toyota Supra JZA80 - 1993-2002 - Non Turbo

the loner

SPF4775K Differential Torque Arm Bush Kit - Rear

Solid axle vehicle only (Replaces SPF3152K)

Kit replaces all bushes in upper & lower arm

Volvo 740 744-745 - 1984-1990
Volvo 760 704-764 - 1981-1992
Volvo 940 944 - 1990-1998
Volvo 960 964 - 1990-1996
Volvo S90 2.9 - 1997-1998



TRC185FLK Easy-Lift Strut Spacer Kit

To be used with standard height suspension only.

This kit will lift the vehicle approx. 45mm and retains the standard suspension.

Kit contains 2 Front Strut Spacers

To be used with standard height suspension only.

Holden Colorado  RG Tdi - 2012-on
Isuzu D-Max MP Tdi 4x4 2012 on



SPF4801K Hand Brake Cable Extension Kit

Required when fitting lifted, high load carrying leaf spring packs.

Holden Colorado  RG Tdi - 2012-on
Isuzu D-Max MP Tdi 4x4 2012 on


SPF4665K Toe Control Arm Inner & Outer Bush Kit

Standard Replacement

Suzuki Swift MK 2 - 1989-2001
Holden Barina MF-MH - 1989-1994


SPF4665K Toe Control Arm Inner & Outer Bush Kit

Honda Integra DC2 & DC4 Vti-R / Type R - 1993-2001



Tuesday, 24 January 2017 02:50

SuperPro at AAAE

Written by

SuperPro is going to the Australian Auto Aftermarket Expo

SuperPro is proud to announce that we will be attending the Austrlian Auto Aftermarket Expo! Where will be showcasing our latets products, be holding prizes and have freindly staff to help you along the way.




When is it?

SuperPro will be at the expo from the 6-8th of April.


Where are we?

SuperPro will be right door to Formula at booth number L14. Here is a map.


What are we Doing?

We will be showing off our latest products and innovations, holding games, giving out prizes, sharing awesome information and just genrally having a good time.

Our latest products include the following;

  • New Mustang Product Line
  • Nissan Patrol Lift Correction Arms
  • Ranger, Hilux, FJ Cruiser and Prado Lift Align Arms
  • New Bushing Kits
  • New Sway Bars
  • And much more...


Special Guest!

This year Chaz Mostert will be coming along to our booth and will be hanging around with staff and product. Feel free to get merchandise signed, get photos and have a chat. There also might be something extra awesome ;)





After developing, what is arguably, the most sophisticated, castor increase and high articulation and replacement Radius arms for the Toyota Landcruiser.



SuperPro now has the Patrol covered!




The SuperPro Lift Correction Arms incorporate Polyelast® Blade Technology and have been developed using sophisticated Finite Element Analysis programming, used extensively in the OE environment, along with a

rigorous testing regime both in the lab and in the field. The combination of a 20% increase in sectional properties combined with the use of OE grade High Strength, High Toughness Australian steel, the result is an arm

of comparable weight to the original radius arm, with increased strength, built for all on road and off-road conditions.




Why be concerned about Castor?

It should be common knowledge by now that raising a vehicle washes off castor. The effects of decreased castor are a loss of straight line stability, vague steering at higher speeds and can cause castor shimmy. The

SuperPro Lift Correction Arm Kit solves the issues with “built in” castor correction in the design, with nearly 4 Degrees for a 50mm lift and 2.5 Degrees for a 75mm lift. These Radius Arms have been designed with castor

correction to only suit raised vehicles. The design uses concentric bushings with advantages such as durability, comfort and increased articulation over non-centrally located bushings.



Why deliver more Articulation?

Articulation is critical to maintain tyre contact and keeping the cabin stable in rough road and off road scenarios. Articulation is the ‘hanging point’ for many aftermarket Radius arms, which continue to use the OE

bushings or inferior replacement rubber alternatives. The SuperPro Radius Arm Bushings utilises the Polyelast material and offers superior articulation by redefining the form and function of the bushing in this location. By

redesigning the profile of the bushing and creating a pocket for the Polyelast material to flow, a higher articulating bush with far greater durability has been created. The addition of a larger inner tube has led to a more

robust part for high speed highway stability and off road ruggedness without compromising NVH.




Why be concerned about un-sprung weight?

When it comes to a radius arm and vehicle suspension, unsprung weight is a critical factor. It affects not only ride and comfort but the dynamic system dampening and harshness. Vehicle Manufacturers spend a

significant amount of time tuning vehicle suspension systems to ensure resonant frequencies are mitigated and tyre to road contact is maximised in all conditions, altering the unsprung mass of components has potential

to compromise this.   The SuperPro Lift Correction Arm retains the OE design intent by providing an equally weighted arm. Solid section radius arms may well be rugged for the extremist 4x4 user, but the extra weight

does cause concerns and adds stress to other suspension components. This can be an issue on heavily corrugated roads where the extra unsprung mass generates more energy that has to be absorbed by the shock

absorbers, add to this, a set of bigger, heavier wheels and tyres and this issue is further exacerbated. With advances in materials and engineering designs, a smarter hollow section option exists today over the “old

school” solid design.



Now there is no reason to compromise on road handling for off road performance and durability.


TRC1015 - Now available: to suit Nissan Patrol GU 1997 to 2010


Tuesday, 02 June 2015 03:40

Advanced Polymer Technology - Polyelast

Written by


SP Logo 2011 Version


...now incorporates one of the world's newest and smartest technologies into its products...


Polyelast logo sml


A ground breaking material incorporating an advanced Elastomer Formulation, that provides high temperature resistance with memory properties that are far superior to other natural materials that are used in OEM manufacture.

PolyelastTM has excellent elongation properties which is an advantage in bushings and mounts where high articulations are required.

PolyelastTM has been developed in conjunction with a world class company who are leaders in advanced automotive suspension components and materials.

PolyelastTM is the smartest material to be produced in the last decade!


Polyelast Hybrid (Patent Pending)

diagram poly

PolyelastTM Hybrid can be used in all after-market and OE suspension applications i.e. standard or performance cars, customised cars, high end sports cars, 4WD’s and trucks.

Working in parallel, PolyelastTM provides the primary noise and vibration isolation, while the progressive SuperPro Polyurethane limiter protects the Polyelast and provides renowned SuperPro handling, performance and durability.

Testing has proven PolyelastTM Hybrid to be one of the worlds most durable suspension components, with the added advantage of noise and vibration control.

This is the first time an Elastomer and Polyurethane have been used in combination successfully to provide all the desired outcomes.

Polyelast logo HYBRID


PolyelastTM adds a new dimension to PERFORMANCE and DURABILITY.

poly part

Click here to download brochure


Tuesday, 02 June 2015 03:30

Spares Box

Written by

Spares Box was created with one single goal in mind and that was to make online shopping for automotive parts more convenient and easily accessible. With that in mind, Spares Box have created an easy to use one-stop webstore for anyone with any type car who might need spare parts delivered in a timely manner.

Spares Box is committed to bringing the best range of parts and accessories at competitive prices to all corners of Australia and right to your garage door.

Spares Box carry a range of trusted household and performance brands including Bosch, Meguiars, Narva, Monroe, King Springs, K&N, Kincrome and Top Gun just to name a few.

Spares Box also carry a range of spare parts and products including car care and cleaning, electrical, ignition, oils and lubricants, brakes, suspension, heating, cooling, engine, performance and so much more to ensure that your car stays on the road.

URL: sparesbox.com.au

Wednesday, 27 August 2014 00:00


Written by


Thursday, 06 March 2014 05:04

Enquiry Form

Written by
Wednesday, 04 December 2013 00:01

Thank you for your registration

Written by

Thank you for your application

Thank you for your registration. Once we have approved your application we will notify you of your access details.

Page 1 of 5